How to pack your road bike for a trip abroad

Eurostar or plane, make sure your steed arrives safely

Your holiday's booked and you're off to ride your bike in foreign climes. The tricky part is taking your bike on a plane with you.

Perhaps you've heard that Eurostar is soon going to require bike-bearing passengers to box up their precious steeds before embarking. Yup, we're not fans either, but it means you're going to need to know how to pack it safely. Here's the info you need…

Related: How to pack your mountain bike up for travel

What to pack your bike in

Most airlines require bikes to be either boxed or bagged for travel. A decent bike bag can cost anywhere between £60 / US$90 and £500 / US$900, which we'd say is a worthwhile investment if you intend to travel with your bike often, or even if you regularly transport your bike by train, bus or car. It's also an excellent option for long-term storage.

Bag or box, here's how to pack your bike for a trip abroad:
Bag or box, here's how to pack your bike for a trip abroad

A cheaper option – and one the Eurostar will offer for free – is to pack it in a cardboard bike box. These are cheap or even free from your local bike shop, and offer good protection – but there's a limit to how many times you can fold them down and build them up again.

Hard bike cases offer good protection, but are a real pain to stash in the back of a hire car or hotel wardrobe.

How to pack your bike

To pack your bike, you'll need the relevant bike breaking-down tools, pipe lagging/bubble wrap, zipties/toe straps, a rag, some spare cardboard and duct tape. If you can get the plastic fork/rear end spacers from the local bike shop then all the better.

Pedals, seatpost and saddle

Take off your pedals, tape them together and tape the threads, then carry them in your regular luggage if you don't have a bag with side pockets. Don't leave these items loose in the bike bag. Remove your seatpost and saddle, or lower it to its minimum height (as long as this doesn't scratch the post). Make sure the clamp is either lightly tightened or removed and carried in separate pocket.


Remove the wheels, deflate they tyres slightly (don't deflate them too much as this can cause rim damage if the bag gets dropped). Take out the quick-release skewers and tape them to the spokes, or stash them safely in any bag pockets available. If you have plastic fork/rear triangle spacers (which come with new, boxed bikes and forks – your local bike shop might let you have some) put them in place.

Rear derailleur

Remove the rear hanger and derailleur, and then tighten the hanger bolt so as not to lose it in transit. Wrap the mech in bubble wrap or a rag and strap it between the rear stays, so that the hanger doesn't get bent or the chain slap around against the frame.


Depending on the size of your bike and bag, either turn your stem sideways and turn your bars downwards and under the top tube on the chain side (padding the top tube and strapping the bars against it), or, if the bag is too small, remove the bars and strap them in that position (try to leave the stem on or strap/ziptie your forks and head set together to prevent the loss of headset parts).

It's a good idea to install a fork protector:

It's a good idea to install a fork protector

Cranks and chainrings

Turn the cranks parallel and pad the bottom of the chainring. Add foam padding (pipe lagging from your local DIY store) to the main tubes and anywhere else likely to get scratched in transit.

Box it up

If you are using a box then place the bike inside, chaining downwards, and then put in both wheels, one to the front and the other towards the back of the bike (both chain side) with sprockets in the gap in the frame. Pad the contact points/or put cardboard sections in-between and ziptie/strap the wheels to the frame. Seal the box with duct tape and be sure to write your contact/destination details and flight info on the box.

If you're using a cardboard box, make sure to tape it up securely:

If you're using a cardboard box, make sure to tape it up securely

Bag it up

Unless your bag has a hard base then the bike goes in the bag upside down to protect the chaining. If the bag has padded wheel bags then use these and place the wheels on either side of the bike, staggered for less bulk. If you have no wheel bags then follow the padding procedure as with the box, but strap the wheels on the chainside of the frame, staggered for less bulk.

It does not pay to padlock the bag, as security may wish to open it – but a ziptie between the zips will aid security and can easily be cut when you arrive.

A final tip

Always check your bike for damage/loss before clearing customs, otherwise the airline's liability is limited. Be sure to get written confirmation of any damage from baggage handlers too.

This article was published by BikeRadar, the world's leading source of bike reviews, gear reviews, riding advice and route information
  • Discipline: Road, Mountain, Urban, Womens
  • Location: UK, USA, Australia

Related Articles

Back to top