MTB General Forum

Double crown on an enduro

 
View previous topic :: View next topic  
Post new topic   Reply to topic    BikeRadar Forum Index > Mountain bike > MTB General
Author Message
Lt_bob
I've just put a pair of Junior T's on my 05 enduro and don't see what the fuss is about.

By moving the crowns down the stantions to the minimum line, they still have the 170mm travel but are almost the same distance from hub to head tube.

Roll on Cwm Carn this weekend to see how they perform.

Send private message
P-Jay
An extra 20mm travel isn't going to upset the geo any, especially as you say you've droped the front so it's nearly the same.

In fact your frame is the same (aside from some linkage bits at the rear) to an '08 S X Trail which runs 160mm up front.

Just watch for the loss of stearing lock, also if you've taken off 36's to fit the Juniors you've gained travel, but lost a lot of ability, JT's are pretty shoot forks.

The 05-06 Endruo / 05-08 SX Trail frame is an awesome frame that gets used for all sorts. met a guy running Fox 40's and nye on 8"'s of rear travel (via some one-off shock mounts, longer shock and linkage) on his in the Alps and it was flying.

PJ
Send private message
Display posts from previous:   
Post new topic   Reply to topic    BikeRadar Forum Index > Mountain bike > MTB General All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
BikeRadar topic RSS feed 



Powered by phpBB © 2001, 2005 phpBB Group