|
| Author |
Message |
Pavel Spirine
Joined: 22 May 2009
Posts: 96
 |
 Posted Sun Nov 8, 2009 8:26 pm |
Anybody got any of the following?
1) 9 speed right hand shifter. I'm after just a really cheapo replacement to work with a deore rear mech. Not looking to spend much more than a fiver or so (I bought one off ebay but it turned out to be for the front derailleur instead!)
2) Seatpost 30.9mm (300-350mm length). I'm currently looking at buying a brand new easton ea50, so something similar would be good. Looking at something light-ish but not fragile (95kg rider weight). If I can find one for 15 pounds shipped, I'll get it. If not I'll just buy the brand new one from CRC.
3) Star fitted nut or hope head doctor, with top cap. Must be dirt cheap just to install in a new fork that I bought and am not bothered to try and bodge out the one from my old fork!
Will pay by paypal (non-gift) or direct bank transfer :]
Thanks
|
|
|
grotty
Joined: 01 Sep 2009
Posts: 43
|
Posted Sun Nov 8, 2009 9:06 pm |
i have a basic but very good condition seatpost from a 2008 rockhopper, and a right-hand 9 speed deore shifter with a bit of plastic chipped off the window, works absolutely fine and in good nick otherwise. £12 posted for both.
|
|
|
Pavel Spirine
Joined: 22 May 2009
Posts: 96
|
Posted Sun Nov 8, 2009 9:47 pm |
grotty, do you know the weight of the seatpost? If not, I might ask in another section of the forum. Also, do you have a pic of the seatpost? (not fussed about the cosmetics of the shifter as long as its mechanically sound).
Consider these provisionally sold pending seapost details
Cheers
|
|
|
grotty
Joined: 01 Sep 2009
Posts: 43
|
Posted Mon Nov 9, 2009 8:02 am |
sent you pm
|
|
|
CitizenLee
Joined: 24 Jun 2007
Posts: 297
Location: Aberdoom
|
Posted Mon Nov 9, 2009 4:38 pm |
PM me your address and I'll send you a M-Part start-nut (inc cap) for nothing.
I wont make it to the Post Office til Wed but if you don't mind waiting I'll happily send it on.
|
|
|
The Beginner
Joined: 30 Apr 2009
Posts: 468
Location: Leamington Spa
|
Posted Mon Nov 9, 2009 10:25 pm |
Have a Thomson elite seatpost, 31.8 but its been shoretend to 240mm, excellent condition, 204g, (I-beam) with micro adjust (2 bolt) and scale for tilt angle.
£10 or £12 delivered.
Simon
FCN9 using a home built hybrid (believed to be a Carrera touring frame) also building an MTB from a Kraken frame. |
|
|
Pavel Spirine
Joined: 22 May 2009
Posts: 96
|
Posted Mon Nov 9, 2009 11:04 pm |
Thanks Simon, but I've purchased the seatpost from grotty.
Thanks to grotty and CitizenLee, I've now got all the bits I need.
|
|
|
|
Search
