Giant Headsets Help

Sorting out your thrunge brackets, fettling your inter-rositers and even stuff about bike parts.
User avatar
Lives Here
Posts: 80713
Joined: Thu Mar 20, 2003 12:14 pm

Re: Giant Headsets Help

Postby nicklouse » Wed Nov 07, 2012 16:02 pm

bubbleride wrote:Nicklouse: do u think there might be a chance of using this headset ... t=1&i=all&
Is 12 mm depth smaller than nukeproof

no idea you have the frame measure the insert depth. but again I dont think the steerer will pass though.
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown

Posts: 10
Joined: Tue Nov 06, 2012 14:44 pm

Re: Giant Headsets Help

Postby bubbleride » Thu Nov 08, 2012 01:30 am

97th choice wrote:
bubbleride wrote:
97th choice wrote:Just for info a mate put a 120mm reba on his and is very happy with it.

same frame and tapered steer as well and thank that was very helpful.

No, as the wise old men above have said. :D

It's a is straight steerer but 120mm rather than the 100mm you are looking at. Just an option if you would like a bit more travel.

One thing to remember if buying second hand is that the yukon frame needs quite a long steerer length, measure yours when removing it.

Currently running 205mm long steer length would a 220+mm steer lenght do the trick or a bit more.

User avatar
The Rookie
Posts: 23063
Joined: Thu Apr 30, 2009 09:29 am

Re: Giant Headsets Help

Postby The Rookie » Thu Nov 08, 2012 07:03 am

Worry first if it will actually go IN your frame......

But yes it would.

User avatar
97th choice
Posts: 2248
Joined: Sat Oct 24, 2009 21:37 pm

Re: Giant Headsets Help

Postby 97th choice » Thu Nov 08, 2012 07:47 am

nicklouse wrote:thinner in the middle. not a straight tube.

Checked my mates, it is indeed waisted. I don't think it is possible to fit a tapered steered, at all.

Has the OP already made his purchase perhaps?
Too-ra-loo-ra, too-ra-loo-rye, aye

Giant Trance
Radon ZR 27.5 Race
Btwin Alur700
Merida CX500

Posts: 10
Joined: Tue Nov 06, 2012 14:44 pm

Re: Giant Headsets Help

Postby bubbleride » Thu Nov 08, 2012 07:55 am

Yeah check everything and it has come to a conclusion that a tapered steered will not work with the bike/frame. Going to stick with 1 1/8" steer and thanks everyone for their information. :)

Return to “MTB Workshop & Tech”

Who is online

Users browsing this forum: No registered users and 1 guest