I have a Dura Ace 7900 10sp casette on my scott. Problem seems to be when the lock ring is done up tight (and it is tight) there is still a very slight bit of play between the cogs. I have the small spacer on the hub, then the casette with the right spacers in between etc. When you get hold of wach cog you can rock it back and forwards slightly and from left to right maybe half a .mm ?: any ideas? what could be wrong? a guy said you have a spacer missing but I dont think i do? any ideas welcome?
Ask for advice or share your fettling tips
3 posts • Page 1 of 1
wheel is a dura ace 50 clincher. the spacer is the normal thin shimano one that goes on the hub before the casette. should you have two of these? as it seems such a small thickness thats required. i dont have tools here to take it off and show a pic until later in the week.
Who is online
Users browsing this forum: Me-109 and 4 guests