Powertap freehub spares?

Ask for advice or share your fettling tips
Bigpikle
Posts: 1596
Joined: Mon Dec 14, 2009 21:10 pm

Powertap freehub spares?

Postby Bigpikle » Sat Dec 22, 2012 09:27 am

Looking for a specific little part for my PT hub but cant find it listed on any sites - hoping someone might be able to help?

I need one of the little bands that holds the 3 pawls/cams in place on a 15mm Powertap freehub body. Its the bit that sits in the groove to the left of the red seal in the pic below. Without it the freehub wont engage and the wheel just spins....

Image

Have emailed Paligap and a PT dealer but nothing so far so wondered if anyone had any ideas?

Thanks
Your Past is Not Your Potential...

User avatar
NapoleonD
Posts: 18117
Joined: Sat Oct 08, 2011 19:51 pm

Re: Powertap freehub spares?

Postby NapoleonD » Sat Dec 22, 2012 09:34 am

Give Paligap a phone call, although it will likely have to be in the new year now though.
Ask for the powertap service dept. they are really helpful IME.
Twitter - @NapD
Strava - Dense Voigt

Bigpikle
Posts: 1596
Joined: Mon Dec 14, 2009 21:10 pm

Re: Powertap freehub spares?

Postby Bigpikle » Sat Dec 22, 2012 22:05 pm

cheers Nap
Your Past is Not Your Potential...

DesWeller
Posts: 5233
Joined: Mon May 05, 2008 15:36 pm

Re: Powertap freehub spares?

Postby DesWeller » Sun Dec 23, 2012 22:18 pm

Looks awfully like my Novatec hub. As it happens I have a borked spare; if you have no luck with Paligap (and the diameter of the ratchet pawl housing is the same, of course) give me a shout and you can have it.

Bigpikle
Posts: 1596
Joined: Mon Dec 14, 2009 21:10 pm

Re: Powertap freehub spares?

Postby Bigpikle » Mon Dec 24, 2012 10:17 am

thats kind - thanks

I'll see if I have any luck with Paligap etc in the New Year
Your Past is Not Your Potential...

Bigpikle
Posts: 1596
Joined: Mon Dec 14, 2009 21:10 pm

Re: Powertap freehub spares?

Postby Bigpikle » Sun Jan 06, 2013 21:39 pm

Must just say that Paligap sent me exactly what I needed FOC which was very good of them - good customer service :)
Your Past is Not Your Potential...


Return to “Workshop”

Who is online

Users browsing this forum: 6wheels, hububalli and 4 guests