BMX Gyro front back cable and linkage fix..!! PLS HELP

Want to get your kids on two wheels? Got any general 'family biking' questions? Chat here
Steve blackwell
Posts: 2
Joined: Fri Feb 29, 2008 21:33 pm

BMX Gyro front back cable and linkage fix..!! PLS HELP

Postby Steve blackwell » Fri Feb 29, 2008 21:47 pm

Hi all Can anyone tell me how the front brake set up should be or where it is routed to put back together on in need of repair Diamond back Joker bike of my son. pls email me with diagrams or a easy to understand route path of cable and fixings etc from brake lever to brake calipers. mail addresss SBlackwell1964@ hotmail.co.uk pls.

Steve blackwell
Posts: 2
Joined: Fri Feb 29, 2008 21:33 pm

BMX Gyro front back cable and linkage fix..!! PLS HELP

Postby Steve blackwell » Fri Feb 29, 2008 21:54 pm

PLS MAIL ME WITH ANSWERS TO HOW THE FRONT BRAKE CABLE RUNS FROM BRAKE LEVER TO CALIPER..
IT SEEMS TO DRAOP DOWN HANDLE BAR CENTRE AND THEN OUT SIDE OF FORK STEM THROUG HSMALL DRILLING.. BUT WHEN I DO RUN IT THAT WAY IT SEEMS TO JAM UP OR STICK..??

HELP PLS MAIL SBLACKWELL1964@HOTMAIL.CO.UK

User avatar
AndyGates
Posts: 8460
Joined: Wed Mar 19, 2003 09:32 am

Postby AndyGates » Fri Feb 29, 2008 22:20 pm

With a gyro there are two cable runs, one from the lever to the gyro and the other from the gyro to the caliper. If it isn't obvious it might be safer for your son if you let a bike shop look at it - it's a quick job.
Wanted: Penny farthing. Please PM me!
Advice for kilted riders: top-tubes are cold.


Return to “Family & Kids cycling forum”

Who is online

Users browsing this forum: No registered users and 2 guests