Clicking noise

Home of daft questions and helpful answers.
mr_eddy
Posts: 446
Joined: Sat Feb 21, 2009 15:26 pm

Clicking noise

Postby mr_eddy » Fri Oct 26, 2012 12:19 pm

My new build SS has an annoying clicking noise. It only happens when you are putting force into the pedal strokes, I have tried to listen where but too much wind noise and getting off the bike is no good as you have to be pressing down / on the bike for the noise to appear. Its random sometimes its there sometime not

All the components are brand new, I have checked for play in the BB nothing. I have tightened the crank arm bolts as tight as I dare plus any other bolts I can see. The wheels are standard bolts and again are very tight with no play. No side to side play or fore/aft play in the wheel or hub. The spokes are all of uniform tension and wheels along with everything else is brand new.

Some people have mentioned the pedals. These seem to be very well screwed in but I will regrease and re-fit.

The only other thought I had was it could be the BB, whilst new its a cheapo shimano square taper with plastic screw in cups not metal ones. It cost me £8 from chain reaction, the chain is also a cheap £3 SS chain (brand new though)

Thoughts.

mr_eddy
Posts: 446
Joined: Sat Feb 21, 2009 15:26 pm

Re: Clicking noise

Postby mr_eddy » Fri Oct 26, 2012 12:36 pm

I should also add that I don't think its the seatpost as the noise happens when I am pedalling out of the saddle too.

There is very little clearence between the frame chainstay and the chainset i.e the frame is designed to take a 46t Max chainset which is what I have but the clearence from the inside edge of the chainset side closest to rear freewheel is only about 1mm, It spins freely and there are no marks on the frame suggesting its come into contact.

jockywilson
Posts: 88
Joined: Wed May 16, 2007 15:38 pm

Re: Clicking noise

Postby jockywilson » Fri Oct 26, 2012 12:45 pm

Could be the bottom bracket - had a creaking noise from there a couple of weeks ago and fixed it by removing and regreasing the BB threads. Looks like it was caused by water ingress from the manufacturing holes on the frame seatstays as there was a fair amount of rusty water when the BB was removed.

utgaardaolle
Posts: 27
Joined: Thu Apr 21, 2011 17:35 pm

Re: Clicking noise

Postby utgaardaolle » Fri Oct 26, 2012 19:27 pm

Jus wanted to add that cheap shimano square taper (UN-26, UN 54) will last longer with less fuss than most high-end BB-s.

Rothsay
Posts: 55
Joined: Sat Feb 06, 2010 22:22 pm

Re: Clicking noise

Postby Rothsay » Tue Oct 30, 2012 21:55 pm

This sounds like the problem I have at the moment. I thought it was the pedals but it is still there with a different set. The BB seems nice and tight but it is still there - at trip to the lbs is on the cards.


Return to “The Workshop.”

Who is online

Users browsing this forum: No registered users and 2 guests