Hub and rear wheel help?

Sorting out your thrunge brackets, fettling your inter-rositers and even stuff about bike parts.
jeffhob1985
Posts: 13
Joined: Tue Jan 18, 2011 09:35 am

Hub and rear wheel help?

Postby jeffhob1985 » Sun Nov 11, 2012 12:18 pm

Hi all i have a specialized P2 2008 frame. and looking on ebay for a wheel set. Does anyone know if a nukeproof 135mm x 12mm hub will fit? or do i need a 150mm hub? and do i need a 12mm axle? or to have qr do i need a conversion??

User avatar
warpcow
Posts: 1435
Joined: Mon Jan 11, 2010 15:10 pm

Re: Hub and rear wheel help?

Postby warpcow » Sun Nov 11, 2012 13:13 pm

I don't think any of what you've listed will fit. The P2 is a 135x10mm bolt-up with horizontal dropouts isn't it? You need a hub in that size, or that can be converted to that size. Or you could use a normal 135mm qr hub, but it's not ideal for a jump bike and you'd need a tugnut too.

jeffhob1985
Posts: 13
Joined: Tue Jan 18, 2011 09:35 am

Re: Hub and rear wheel help?

Postby jeffhob1985 » Sun Nov 11, 2012 13:38 pm

Not sure on the frame size thats what i needed help with as can not look as frame is with a paint sprayer. I have won hubs on ebay and the rear is 135mm x 12mm!! Do you know if you can get a conversion kit to make it 10mm?

User avatar
nicklouse
Lives Here
Posts: 80713
Joined: Thu Mar 20, 2003 12:14 pm

Re: Hub and rear wheel help?

Postby nicklouse » Sun Nov 11, 2012 14:38 pm

have a look for a 135 X12mm to 10mm axle. you may need to get the rear wheel re dished though depending on which P2 it is.
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown


Return to “MTB Workshop & Tech”

Who is online

Users browsing this forum: The Rookie and 2 guests