Lapierre bb/crank help

Sorting out your thrunge brackets, fettling your inter-rositers and even stuff about bike parts.
welshgar
Posts: 11
Joined: Sat Jul 07, 2007 22:24 pm

Lapierre bb/crank help

Postby welshgar » Mon Nov 19, 2012 22:23 pm

Will the cranks off my santacruz fit on to a lapierre??

They are race face atlas and i think 73mm.

Also does any one know the seat post and clamp size needed for lapierre??


Thanx

User avatar
supersonic
Lives Here
Posts: 81828
Joined: Fri Nov 25, 2005 11:50 am

Re: Lapierre bb/crank help

Postby supersonic » Mon Nov 19, 2012 22:30 pm

Without knowing the exact models of bikes, it is impossible to tell.

welshgar
Posts: 11
Joined: Sat Jul 07, 2007 22:24 pm

Re: Lapierre bb/crank help

Postby welshgar » Mon Nov 19, 2012 22:32 pm

Sorry, zesty

welshgar
Posts: 11
Joined: Sat Jul 07, 2007 22:24 pm

Re: Lapierre bb/crank help

Postby welshgar » Mon Nov 19, 2012 22:32 pm

The santa cruz was a nomad

User avatar
benpinnick
Posts: 4137
Joined: Sun Sep 16, 2007 17:08 pm

Re: Lapierre bb/crank help

Postby benpinnick » Mon Nov 19, 2012 22:41 pm

Yes, depending the year(s) though, probably new BB for the zesty. 31.6 and 34.9
A Flock of Birds
+ some other bikes.

welshgar
Posts: 11
Joined: Sat Jul 07, 2007 22:24 pm

Re: Lapierre bb/crank help

Postby welshgar » Mon Nov 19, 2012 22:45 pm

The crank set is new. But off a 2008 nomad, possibly going on a 2012 zesty

Thanks for the other info though

User avatar
benpinnick
Posts: 4137
Joined: Sun Sep 16, 2007 17:08 pm

Re: Lapierre bb/crank help

Postby benpinnick » Mon Nov 19, 2012 22:47 pm

So definitely new bb time then.
A Flock of Birds
+ some other bikes.

welshgar
Posts: 11
Joined: Sat Jul 07, 2007 22:24 pm

Re: Lapierre bb/crank help

Postby welshgar » Mon Nov 19, 2012 22:52 pm

Crank set will fit though??

User avatar
benpinnick
Posts: 4137
Joined: Sun Sep 16, 2007 17:08 pm

Re: Lapierre bb/crank help

Postby benpinnick » Tue Nov 20, 2012 07:35 am

yes or maybe no : the cranks are new you say, so I assume new and therefore hollowtech / built in axle type. But of curse new could be new to you, but not latest spec. Youll need to get a pressfit BB for the Zesty, and the cranks will fit straight in IF they are hollowtech axle type (and not the 83mm FR cranks). Older atlas cranks that fit onto a BB with an axle wont, unless someone else knows where you can get a pressfit axled BB...
A Flock of Birds
+ some other bikes.

welshgar
Posts: 11
Joined: Sat Jul 07, 2007 22:24 pm

Re: Lapierre bb/crank help

Postby welshgar » Tue Nov 20, 2012 08:20 am

Sweet. They sre the latest set, well last one they did. Hollowtec and definitely not 83mm free ride crancs.

Thank you


Return to “MTB Workshop & Tech”

Who is online

Users browsing this forum: No registered users and 1 guest