Half and Half Pedals!

Discuss the eternal "Which fork/bike/tyres should I buy?" questions.
supergrass
Posts: 85
Joined: Sun Aug 03, 2008 07:06 am

Half and Half Pedals!

Postby supergrass » Fri Nov 30, 2012 14:34 pm

Im after some pedals costing no more than 50 quid. I usually ride flats but fancy being brave and going clipped in.. However im not feeling totally brave and fancy a half and half soloution.

The 2 ive been recommended are the Shimano M324 or the Crank brother mallets.. Any one got any other recommendations.

Chunkers1980
Posts: 7909
Joined: Tue Feb 10, 2009 14:12 pm

Re: Half and Half Pedals!

Postby Chunkers1980 » Fri Nov 30, 2012 14:41 pm

Buy a pedal spanner and swap as needed.

User avatar
nicklouse
Lives Here
Posts: 80713
Joined: Thu Mar 20, 2003 12:14 pm

Re: Half and Half Pedals!

Postby nicklouse » Fri Nov 30, 2012 14:42 pm

1/2 n1/2 total waste of time they are the worst of both.

the Crank brother mallets are just a pedal with a platform the mecanism is still there to get in the way so not good for using without cleats.
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown

miss notax
Posts: 2608
Joined: Wed Jan 09, 2008 17:15 pm

Re: Half and Half Pedals!

Postby miss notax » Fri Nov 30, 2012 14:53 pm

http://www.wiggle.co.uk/shimano-m424-spd-pedals/

I use these on the Minxy (I have XT cleats on the other bikes) so that if I can't clip in on some downhill trail then at least I have a stable platform and stand a chance of getting to the bottom in one peice!
Life is not measured by the number of breaths you take, but by the number of moments that take your breath away....

Riding a gorgeous ano orange Turner Burner!

Sponsor the CC2CC at http://www.justgiving.com/cc2cc

User avatar
70\'sPenguin
Posts: 917
Joined: Sun Oct 16, 2011 17:45 pm

Re: Half and Half Pedals!

Postby 70\'sPenguin » Fri Nov 30, 2012 15:10 pm

The M424's are a good start. However, if you use a stiff soled shoe then the added cage really wont make that much difference IMO, as all you will feel is the raised clip part. If you use trainer style with a spd bit then you will get more of a feel but its still minimal.

Half and Half is a really bad idea! The weight of the Flat part will always be at the bottom and so you will always be flipping the pedal to get a footing.

Personally id start with the 424 or just splash out a huge £15 on some 520's with no cage.

User avatar
Bartimaeus
Posts: 1814
Joined: Fri Jan 22, 2010 16:29 pm

Re: Half and Half Pedals!

Postby Bartimaeus » Fri Nov 30, 2012 17:02 pm

I have some old half and halfs... I would not bother. The flat side is too small and the SPD side is a pain to use. They are OK for road use - but not for trail riding. Buy a pedal spanner and swap.

snoopsmydogg
Posts: 1042
Joined: Wed Apr 25, 2012 12:34 pm

Re: Half and Half Pedals!

Postby snoopsmydogg » Fri Nov 30, 2012 20:11 pm

Bought some m520s to try clipless and see how i liked them but left the plastic flat on one side just in case. tbh like others have said they were hard work, the spd side had to be right side up to clip in which isn't always easy and when going down singletrack on the flat i found many occasions where i bounced off and ended up clipped in anyway.

Like everyone else says use one or the other it doesn't take long to swap pedals over if need be

starbuck
Posts: 144
Joined: Sat Sep 20, 2008 19:07 pm

Re: Half and Half Pedals!

Postby starbuck » Sat Dec 01, 2012 16:01 pm

I run M647's (like the 424's but better) on both my mountain bike and hybrid. They do have clips both sides but you can unclip and ride on the cage for any bits you're not sure about. I had half and half when I first went clipless and found it a pain to keep flipping the pedal over to get to the clip side.

Once you go clipless, you won't look back. I am getting a road bike soon via cycle to work and will get a cageless pedal, but I will never regret getting the M647's. I like the feeling of a cage to plant my foot on when clipped in, seems (probably psychologically) that it gives me more power when flooring it.

User avatar
WindyG
Posts: 1071
Joined: Sun Aug 19, 2012 18:30 pm

Re: Half and Half Pedals!

Postby WindyG » Sat Dec 01, 2012 16:44 pm

I started off with M424's, only used for a couple of rides, fine when clipped in but if you do come out of the clip you end up looking down too much when trying to get the correct side, they just wern't natural enough to use, plus they are heavy compared to a standard clipless pedal. I switched to M540's and can't see myself ever using flats but that's just a personal choice.

supergrass
Posts: 85
Joined: Sun Aug 03, 2008 07:06 am

Re: Half and Half Pedals!

Postby supergrass » Sun Dec 02, 2012 09:32 am

Cheers Guys for the responces... i have been talked out out half and half pedals. Ive still got my old flats if i dont like being clipped in so ive just ordered some shimao m520's and going clipped in


Return to “MTB Buying Advice”

Who is online

Users browsing this forum: Mattcurrie93, snowster and 3 guests