Head angle adjustment

Discuss the eternal "Which fork/bike/tyres should I buy?" questions.
Cubist
Posts: 62
Joined: Thu Jan 19, 2012 17:50 pm

Head angle adjustment

Postby Cubist » Mon Dec 03, 2012 20:06 pm

Im aware that there are companies such as cane creek that make stuff to enable you to adjust your head angle.
Are any of these suitable for a cube acid and, if so, which is my best bet to slacken the head angle by a degree?

User avatar
DCR00
Posts: 1979
Joined: Fri Apr 30, 2010 14:03 pm

Re: Head angle adjustment

Postby DCR00 » Mon Dec 03, 2012 21:07 pm

try works components

pretty sure the CC Angleset only works for 1.5 headtubes (for now)

Cubist
Posts: 62
Joined: Thu Jan 19, 2012 17:50 pm

Re: Head angle adjustment

Postby Cubist » Tue Dec 04, 2012 19:49 pm

DCR00 wrote:try works components

pretty sure the CC Angleset only works for 1.5 headtubes (for now)


Whats the headtube measurement on the acid?

User avatar
DCR00
Posts: 1979
Joined: Fri Apr 30, 2010 14:03 pm

Re: Head angle adjustment

Postby DCR00 » Tue Dec 04, 2012 19:59 pm

pretty sure its 1 1/8

User avatar
RevellRider
Posts: 1813
Joined: Thu Jun 05, 2003 20:27 pm
Contact:

Re: Head angle adjustment

Postby RevellRider » Wed Dec 05, 2012 17:07 pm

It's a 44mm zerostack, which they do an angleset for, but you may not have enough length on the steerer tube and it will raise the front end of the bike.
http://www.extrauk.co.uk/product/detail ... sets/2241/


Return to “MTB Buying Advice”

Who is online

Users browsing this forum: No registered users and 1 guest