Eurobike 2010: Easton wheels and components

Updates to road and mountain bike ranges

Easton's EC90 SL carbon road clincher wheels will gain a new deep-section stablemate for 2011 with the addition of a 56mm profile rim - much deeper than the standard model's 38mm.

The new EC90 Aero wheels otherwise sport the same Thermatec sidewall construction that has yielded very good braking performance in our own tests. 

Easton laces the new rims straight-pull Sapim CX-Ray bladed stainless steel spokes and external red-anodised alloy nipples to its own R4SL hubs, complete with adjustable hybrid ceramic cartridge bearings and interchangeable alloy freehub bodies.  Claimed weight is 1,670g for the set and suggested retail price is US$2,000.

Easton EA90 XC

Cross-country riders finally get a long-awaited follow-up to Easton's XC One in the new EA90 XC.  Though slightly lighter at 1,560g for the pair, the real story is in the new rim construction and hubs.  Easton has adapted the riveted-in threaded nipple technology from its Haven all-mountain model for the EA90 XC, leaving a solid outer rim wall with true UST tubeless compatibility.  Easton has also added a millimetre of width, too, for better tire casing support and a more secure feel under hard cornering.

Those rims are now laced to Easton's new M1 six-hole disc hubs, built with adjustable cartridge bearings and axle fitments that are convertible between 9mm quick-release and 15mm thru-axle up front, and 135x10mm quick release or 142x12mm thru-axle out back. 

Even better is that Easton will offer the EA90 XC in both 26" and 29" varieties and both are surprisingly reasonably priced.  The 26" version will cost US$900 and the 29" will add just US$25 more.

Replacing the old XC Two is the new EA70 XC, which boasts 150g weight savings plus a generous 24.5mm rim width to better handle high-volume rubber.  Claimed weight on the 26" version is 1,698g for the pair and 1,950g for the 29ers.  Suggested retail prices are US$500 and US$525, respectively.

The updated Havoc downhill rim

At the opposite end of the usage spectrum comes the new Havoc downhill wheels with new, 1mm-wider aluminium rims similar in construction to the Haven and new EA90 XC and the same easy tubeless compatibility courtesy of the solid outer rim wall.  In the case of the Havocs, that solid outer wall's additional strength and lateral stiffness will play important roles with downhill's typically greater speeds and impact sizes, yet total weight has still come down a significant 150g to just 1,750g for the pair.

The new Havocs also come with updated hubs for 2011 with dedicated 20mm thru-axle fitment up front and convertible 135x10mm quick-release or 142/135x12mm thru-axle.

Havoc carbon bar

Going along with the new Havocs are new bars, stems and seatposts to complete the range. 

Easton says the Havoc Carbon bar weighs just 235g yet it's also the strongest bar it's ever built – and it's wide at 750mm, too.  Taperwall construction centres the durability around the stem where it's needed most while also preventing an overly stiff and dead ride. 

Easton will offer the Havoc Carbon in a low 20mm rise configuration only with a 9-degree backsweep and 5-degree upsweep.  Suggested retail price is US$150.

The low-rise Havoc aluminium bar will share the same dimensions as its fancier carbon cousin but with 7050 alloy construction that brings the weight up to 315g.  Price drops in half, though, and the aluminium version will also be available in a 30mm rise as well.

Havoc stems in two different sizes

Joining the bars are the new Havoc stems, offered in direct-mount and conventional styles to fit both 1 1/8" and 1 1/2" steerers.  The Havoc stem shares its design with the Haven family but with even beefier CNC-machined construction and the same clamp geometry to reduce stress risers on handlebars. 

Easton will offer the conventional Havoc in 35mm (1 1/8" only), 50mm, and 65mm lengths while the Havoc Bolt-On stem will sport a three-position adjustable (45/50/55mm) setup, both for US$90.

Cross-country riders and roadies get some new components, too, with the revamped EC90 SL carbon stem and EC90 carbon seatpost.  The new stem boasts a cleaner look than before, an impressive 110g weight (100mm), and a surprisingly generous 80-130mm range of available lengths for US$230. 

EC90 carbon seapost, now in an offset version

Meanwhile, the new EC90 Offset finally provides Easton's lightest seatpost model with a useful 20mm of setback, still with carbon fibre upper and lower cradles and a secure two-bolt head.  Available sizes are 27.2, 30.9, and 31.6mm – all in 350mm length – and claimed weight is 200g.  Suggested retail price is US$200.

Want more? Be sure to check out our video coverage of Easton at Eurobike.

Related Articles

Comments

Back to top