First look: Look 996 full suspension mountain bike

Look's latest foray into the dirt world

Look’s foray into the dirt world with its 986 carbon hardtail was apparently successful enough to warrant a full-suspension cousin.  

The new 996 comprises a monocoque carbon front triangle and an aluminum-and-carbon rear end joined through a pair of short alloy links.  There’s 100mm of travel on tap and claimed frame weight is a competitive 2.5kg (5.5lb) for a small frame with the included RockShox Monarch 4.2 rear shock. 

Look describes the suspension performance as somewhat of a hybrid between VPP and DW-Link but not a direct copy of either (perhaps more to avoid patent disputes than anything else).  Regardless, its self-described anti-squat kinematics supposedly eliminate the need for any shock platform meaning even though the Monarch is so-equipped, riders might not ever use it.  Enduro cartridge bearings all around should keep the rear end fairly supple, too.

We didn’t get a chance to sample the 996 during the official introduction but its beefy front triangle, stout linkages and fully enclosed rear end suggest a solid feel.  Unlike the hardtail, the 996 uses a conventional seatpost in the thinking that full-suspension riders might occasionally have the need to drop their saddle depending on circumstances (we’re not sure if this goes along with the modest 100mm of travel but so be it).  

Geometry is decidedly cross-country oriented: 100mm forks will yield 69.7° and 72.2° head and seat angles, respectively, while an 80mm fork will steepen things up a bit to 70.5° and 73°. 

Related Articles

Comments

Back to top