Aerodynamics guru Steve Hed set forth on an interesting path with the 23mm-wide C2 rim extrusion introduced on his
While it seems counterintuitive that a wide rim would be more aerodynamic than a narrower one, Hed insists it’s the key to making faster wheels, especially in crosswinds. For 2009, the concept has been expanded across nearly the entire wheel range, clinchers and tubulars included. In fact, carbon tubulars go one step further – rim width at the tyre well is 23mm, but the new bulged cross-section now measures a whopping 28mm at its broadest point.
Moreover, tubular tyre wells now measure roughly twice as deep as before, supposedly delivering the same improvements in handling and road feel that the C2 rim did for clinchers.
Normally we’d be sceptical of such claims, but after riding the
HED also introduces a new Flamme Rouge line for those who have to have the latest and greatest. The new hubset uses aluminium flanges bonded to a carbon centre tube that shaves 15g per pair and ceramic bearings will come standard.
Steve Hed has been busy on the aero bar front as well, with a new integrated model called Black Dog. Claimed weight is just 600g complete, aided by the integrated carbon brake levers (with carbon return springs, no less) and carbon construction for the base bar and extensions.
Proper fit on the Black Dog was a key priority: HED will offer three base bars in both flat and drop styles three different extensions and two different armrest mounts, all with nearly countless available permutations of width, length, tilt and rotation.
Expanded wheel range for Reynolds Cycling
Reynolds Cycling’s top-end DV and MV wheels go on a serious diet for 2009, courtesy of an upgrade to high-modulus fibres and a new DT Swiss 240s ‘hybrid’ hubset that borrows the lighter axles, freehub bodies and star ratchets for the higher-end 190 line.
Moreover, Reynolds claims the new UL construction is better at dissipating heat generated from braking than earlier rims and revamped lay-up schedules yield a smoother ride.
As compared to last year’s DV 46 UL, the new DV 46T UL is down from 1200g per pair to just 1040g and a new UL clincher version (last year’s was tubular-only) adds another 205g. The versatile MV line also gets the UL treatment for 2009 – the MV 32T UL’s claimed weight is now bang-on at 1000g, while the clincher version is an excellent 1325g per set.
Last year’s non-UL DV wheels are effectively replaced by a new 3K line, which trades in the unidirectional finish for a glossy woven top sheet. The rims are therefore a bit heavier than those of the UL line and the 3K wheels will also use standard DT Swiss 240s hubs instead of the UL’s hybrid models. Even so, total weights are still highly competitive at 1245g per pair for the tubular version and 1500g for the clinchers.
Naturally, the 3K wheels will also be a bit less expensive. While the new DV 46 UL wheels will fetch US$2750 and US$2400 for the clincher and tubular versions respectively, the 3K counterparts will have retail costs of US$2500 and US$2300.
Also new from Reynolds for 2009 is a clincher version of its Element disc (US$1600, 1340g) and a more value-oriented Strike carbon clincher (US$1575, 1690g) with 66mm-deep rims to complement the existing 46mm-deep Assault and 32mm-deep Attack.
For the off-road crowd, the MTN C (previously known as the Topo C) now weighs just 1385g per pair (a loss of 114g) and a revised rim shape makes for easier conversion to tubeless. A new aluminium model called Canyon will join the lineup for 2009 as well.
And what about the venerable fork line? Reynolds didn’t display any forks at all, saying they were currently being redesigned to meet new stricter CEN testing standards. The new models are slated to hit the market in about 90 days, but the once-comprehensive range will be reduced to only a lightweight road model and a cyclo-cross fork, both with straight, non-tapered steerer tubes and semi-integrated crowns similar to the now-defunct UL.
A slimmed-down rear axle, new aluminium axle end cap and aggressively machined group-specific freehub bodies help shave 36g from last year’s R4 hubs and Grade 3 hybrid ceramic bearings now come as standard. The EA90 SLX also gets new EA6X alloy rims, which save an additional 61g per pair, thus bringing the total claimed weight down to just 1395g with the new hubset. Claimed weight on the updated EC90 Aero and EC90 SLX is now 1335g and 1175g, respectively.
On the trail front, the XC One hubs lose a few grams courtesy of more aggressive machining, an adjustable bearing setup similar to last year’s R4 road hubs and new lip seals. The beefier Havoc gets a new bolt-on rear axle option, while the front hub gets a 15mm thru-axle adapter.
Not much has changed for
While the fork itself is a little heavier as a result, the plug is lighter so it’s mostly a wash; forks with shorter steerers supposedly lose a few grammes. Moreover,