Learning how to pull off a manual can make your riding smoother, faster and more effortless. David Webster shows you how.
This skills series is designed to introduce and develop key trail riding skills that many find impossible to grasp or maybe have never even heard of. This is the stuff that good riders do without thinking, and what many of us do intermittently when we have that perfect day on our favourite trail.
Showcasing the best of
So, what’s a manual?
Manuals are most easily described as non-pedalled wheelies. To be more accurate, they involve manually raising the front end of the bike so that the front wheel can avoid obstacles, dips and other assorted trail hazards – rather than lifting the wheel through pedalling, or not lifting it through at all.
The bottom line is that a correctly delivered manual will enable a rider to make seemingly effortless and flowing progress over the top of the terrain. That’s got to be preferable to getting sucked down and into every root, rut and ditch, bouncing along from one near-disaster to the next.
Learning the manual
As we’ve said, the manual is one of the most useful MTB techniques to master – so let’s cut to the chase and learn how you pull one.
First, find yourself a good car-free space with a decent surface and a flat to slightly uphill gradient (the uphill slope will naturally help you move your weight to the rear of the bike). Build up a brisk jog’s worth of pace on the bike.
Once you are rolling at this pace, adopt the ‘attack’ position: pedals level, weight centred on the bike, two fingers covering the brakes, and looking ahead.
1] Set your weight slightly back from centre, straightening out your arms as you do. You’re aiming to have the widest part of the saddle in contact with your inner thighs, thereby partially unweighting the front wheel.
2] Then, with straight arms, rock your weight dynamically forward, with the aim of loading weight onto the front of the bike.
3] Seamlessly, and with straight arms, rock your weight back. Aim to get the wheel a kerb’s height clear of the floor.
4] Gently dabbing the rear brake will bring the front of the wheel down again.
Always cover your back brake in case you feel the bike wanting to loop out backwards — gently dabbing the rear brake will bring the front of the bike down again. This manoeuvre should see you effortlessly bringing the front wheel up and off the ﬂoor; brute force and grunting tend to indicate poor technique. Remember, if it feels forced and ugly, then you’re doing something wrong.
How you can make learning manuals easier
- Flat pedals and good flat-pedal shoes inspire more confidence. Make sure you set your feet further forward on the pedal than normal to get the most traction from the pedal.
- Slightly lowered saddle heights make life easier. Bear in mind, though, that you’ll ultimately need to be able to do this at the drop of a hat on climbs as well as descents.
- A combination of disc/V brakes with good modulation and feel, plus true wheels, is essential for consistent (non-grabby) braking. Make sure your levers are properly set for two-finger braking. If you have small hands, adjust the levers to their shortest reach.
- Riser bars and shortish stems (70mm or shorter) paired with relatively high front ends are easier to pop up into a manual, because the distribution of your body weight is already biased more towards the back of the bike.
- Any bike with short chainstays (tucking the back wheel tightly under the rider) will be easier to manual. Jump hardtails and similar bikes tend to be best, while full-suspension bikes make life a little harder.