Pro bike: Amy Dombroski's Ridley X-Fire
By James Huang | Friday, February 1, 2013 6.58pm
Amy Dombroski (Telenet-Fidea) is hoping this Ridley X-Fire will carry her to a medal in the elite women's race at the 2013 UCI cyclocross world championship James Huang/BikeRadar
Amy Dombroski may only be 1.55m (5-foot-1) but she packs a big punch and is one of the United States' hopes at a top-ten finish during Saturday's elite cyclocross world championship race. Though raised in Vermont and technically a resident of Boulder, Colorado, Dombroski bases herself in Belgium during the season and is part of the prestigious Telenet-Fidea squad. Her machine of choice is the workhorse Ridley X-Fire.
Ridley is one of just a handful of companies offering high-end 'cross framesets in a very wide size range and Dombroski is on the company's smallest option with a 41cm seat tube (center-to-center) and 502mm (virtual) top tube. Thanks to a stubby 90mm head tube, Dombroski is still able to achieve a reasonable 53mm of drop, too, for a perfectly proportional fit.
Dombroski runs her Red levers high on the aluminum Zipp bar
While the smaller dimensions could yield a truly ultralight setup, Dombroski's X-Fire is built with a similarly workhorse mix of parts for what should be an ultra-durable but still light setup. SRAM provides the bulk of the spec sheet with a previous-generation Red group (including a steel-caged front derailleur), PG-1070 cassette for mud shedding, Zipp's outstanding 303 carbon tubular wheels, an aluminum Zipp handlebar, and an SRM SRAM S975 power meter.
In keeping with typical European 'cross racer tendencies, Dombroski's X-Fire is also built with traditional Avid Shorty Ultimate cantilevers instead of the disc brakes that are already becoming widely adopted stateside. However, they're set in the narrower stance option for more power instead of the wider format that's more prevalent in Europe.
Another nod to the reliability angle is the addition of an AceCo K-Edge Cross Double XL chain catcher, whose stout, adjustable aluminum plate is mounted to a machined clamp just below the front derailleur. Chances of dropping a chain are slim-to-none here – at least to the inside.
The PF30 bottom bracket shell is filled with adapters for the threaded cups
Dombroski has long been supported by Donn Kellogg, who once handled operations for Challenge in the US but is now the face of Clement. Fittingly, she's running Clement rubber front and rear here in the form of the company's latest multi-conditions MXP rear tubular paired to a more aggressive PDX up front. Conditions in Louisville have been wildly variable and especially with the change in timetable, we'll have to wait and see what she uses on race day.
Rounding out the build kit is a Selle San Marco Regale saddle, Crankbrothers Eggbeater 4Ti pedals, FSA's Orbit Z-CX headset with built-in cable hanger, SRAM SuperCork tape, SRM PowerControl 7 computer and an aluminum stem and seatpost from Ridley house brand 4ZA.
Complete weight as pictured is 7.75kg (17.09lb).
|Complete bike specifications |
| || |
|Frame ||Ridley X-Fire, 41cm |
|Fork ||4ZA Oryx |
|Headset ||FSA Orbit Z-CX, 1 1/8-to-1 1/2" tapered |
|Stem ||4ZA Cirrus Pro, 90mm x -7° |
|Handlebars ||Zipp Service Course CSL, 42cm (c-c) |
|Tape/grips ||SRAM SuperCork |
|Front brake ||Avid Shorty Ultimate, narrow profile, w/ Zipp Tangente Platinum Pro Evo carbon-specific pads |
|Rear brake ||Avid Shorty Ultimate, narrow profile, w/ Zipp Tangente Platinum Pro Evo carbon-specific pads |
|Brake levers ||SRAM Red DoubleTap |
|Front derailleur ||SRAM Red w/ steel cage |
|Rear derailleur ||SRAM Red |
|Shift levers ||SRAM Red DoubleTap |
|Cassette ||SRAM PG-1070, 12-27T |
|Chain ||SRAM PC-1091 |
|Crankset ||SRM SRAM S975, 170mm, w/ 44/39T Thorne chainrings |
|Bottom bracket ||SRAM GXP w/ PF30 adapters |
|Pedals ||Crankbrothers Eggbeater 4Ti |
|Wheelset ||Zipp 303 tubular |
|Front tire ||Clement PDX tubular, 33mm |
|Rear tire ||Clement MXP tubular, 33mm |
|Saddle ||Selle San Marco Regale w/ Xsilite rails |
|Seat post ||4ZA Cirrus |
|Bottle cages ||n/a |
|Computer ||SRM PowerControl 7 |
|Other accessories ||AceCo K-Edge Cross Double XL chain catcher |
| || |
|Critical measurements || |
| || |
|Rider's height ||1.55m (5' 1") |
|Rider's weight ||49kg (108lb) |
|Saddle height, from BB (c-t) ||635mm |
|Saddle setback ||10mm |
|Seat tube length, c-t ||410mm |
|Seat tube length, c-c ||450mm |
|Tip of saddle nose to C of bars (next to stem) ||452mm |
|Saddle-to-bar drop (vertical) ||53mm |
|Head tube length ||90mm |
|Top tube length ||502mm (horizontal) |
|Total bicycle weight ||7.75kg (17.09lb) with computer |
You can follow BikeRadar on Twitter at twitter.com/bikeradar and on
Facebook at facebook.com/BikeRadar.
can also improve your fitness and train with us on training.bikeradar.com.