Gary Fisher Roscoe III review

|

$4949.99

Change Currency What's this?
Custom suspension and G2 geometry give the Roscoe superb handling

BikeRadar verdict

4.5 out of 5 stars

"Triumphant big air shock allows this beast to really let loose on the toughest terrain"

Fri 14 Nov 2008, 8:00 am GMTBy

Probably the most universally raved-about ride of the summer bike launches, Gary Fisher’s Roscoe III is a maximum fun all-day bike with a licence to go loony. It doesn’t take long to see what all the fuss is about.

The slack G2 geometry inspires confidence, and the new Fox DCRV shock and QR15 fork are outstandingly smooth. Minor downsides include the way the big tyres slow acceleration slightly, and we’d have liked a Maxle on the back.

Nevertheless, the Roscoe is unshakeable, even through big-hit terrain, yet it’s agile enough to be highly enjoyable through the tight stuff. We had a blast on the Fisher, and if maximum fun is your riding priority this newbie has to be on your shortlist.

Ride & handling: sharp, decisive & ready to rip

Not only does the all-white Roscoe look right, it rides just right too. A head angle of 68° isn’t the slackest of trail bike steering set-ups but it sets the Fisher’s stall out as a proper play bike. It was gagging to dive flat out into technical descents and drift the dusty desert corners feet up and rocks flying.

Despite a mid-length stem and mid-width bar, the reduced trail of the G2 steering geometry gives it a light and effortless feel. It’s perfect for tweaking traction and lines mid-corner, another reason the Roscoe feels ready to rip from the off.

Unlike steeper-angled Fisher G2 cross-country bikes we’ve ridden, there’s no over-twitchy ‘shopping trolley wheel’ sensation. It turns into corners much faster than most slack-angled steady handlers, too, so it’ll run rings round them on tight stuff.

The really long wheelbase and relatively long top tube and rear stays provide reassuring overall stability, however loose or steep things get. Despite the length, it’s still super-stiff for excellent feedback clarity and decisive directional control, too.

It’s not just the chassis that’s spot-on for raising hell, either – the DRCV shock is outstanding. In simple terms, it’s a standard air shock with an auxiliary air chamber at the far end that kicks in at 40% travel.

The effect is a progressive, well damped low-pressure start for small bump sensitivity without excess pedal movement. The spring rate ramp-up of the main chamber gives a great cornering ‘platform’, too.

Bigger hits automatically open the valve and create a much bigger, more linear-feeling air chamber with fast rebound extension to stop pack- down. The 140mm of rear wheel travel is enough to swallow serious blocks and drops without any wallow or pocket/spike inconsistencies in the stroke.

The ABP pivot removes any brake influence, so you can slam on late without losing traction. Full RP23 low-speed compression adjustment lets you set the pedal bob/small bump filter as small as you want.

Frame: familiar lines, modern features

The basic frame silhouette and shock with swing-link design is one Fisher has been using on and off since it introduced the Sugar cross-country bike more than a dozen years ago.

The execution here is certainly different, though, with ‘mushroom’ section top tube and massive squared and S-bent down tube that has been hydroformed into a stiff yet light shape.

The broad-set dangling shock link is magnesium to save weight and there’s a tapered 1.5in/1.125in steerer head tube. That and the custom-built Fox fork use the latest version of Fisher’s G2 handling concept.

Roscoe is the first bike to borrow the ‘ABP’ rear pivot from big brother Trek, with its motion centered on the rear axle.  Not using a stiffer Maxle-style oversize axle is missing a trick, though. It also features a unique Fox DRCV (Dual Rate Control Valve) rear shock that’s a vital part of its outstanding performance.

Practicality isn’t forgotten, though. Despite 2.4in balloon tyres, there’s still masses of mud-room. Straight-through cable routing keeps control wires sealed, although you might want some chain slap protection on top of the chainstay.

Equipment: monster tyres and efficient gear

The monster tubeless-ready 2.4in rubber on broad yet light Rhythm Pro wheels add extra control and comfort. They roll well, too, although extra weight does slow initial acceleration.

The Fox fork gets a unique RP24 compression damping set-up as well as custom offset.

Shimano (front mech and chainset) and SRAM (rear mech and shifters) transmission provide a good mix. Avid Juicy brakes work fine, and we’ve no complaints about any of the Bontrager finishing kit.

Considering ours was a Large, the Roscoe is a respectable weight for its capability. There’s certainly potential for significantly lighter upgrading as cash allows, though.

What's the score with BikeRadar reviews? You can find a full explanation of our ratings here.

User Reviews

There are 6 reviews on this post

Showing 1 - 6 of 6 comments

  • Fantastic bike, the roscoe 3 rides like a dream, whether your riding technical, riding singletracks, climbing, cornering, or anything else this bike can take it at make it easy :D

  • I have a Roscoe 1 as my first intro into MTB having trialled a Roscoe III.

    Its an awesome bit of kit and taken some rather stupid attempts at trail riding. I have changed the wheels and tyres as the first set buckled laterally and pretzled too.

    The replacement DT 5.1s have been untbreakable ( touch wood). The original tyres dont give much clearance at the back ( chain rubs on freewheel in granny gear and a small buckle on old rims rubbed frame) so I have switched from 2.4s to 2.1s with no obvious impact upon handling.

    Front lock out effective as is propedal. Cannot for the life of me work out the rebound setting on the rear show so left it .( cant turn it as gunked)

    Only minor gripe - paint work dull as dishwater - needs lacquering up as metallic flakes look good but have no gloss!

  • The Roscoe 3 is fantastic. It truly is a great all round bike. It climbs up steep, technical trails with ease, it rides like it should be at least a kg lighter.

    Very stable and super fun at high speed. The 140mm travel is very plush and just sucks up both little bumps and big hits with equal ease.

    The Talas Fox forks are very quick and easy to change from 100mm to 140mm and back again if the terrain suits, although I'm happy to leave it on 140mm travel even when climbing.

    I've changed the 2.4 tyres to something more suitable for the UK mixed weather and terrain, 2.1 Panaracer Cinders which are perfect.

    You won't regret buying this bike... this is the most fun I have had on a bike EVER!

  • Just completed the first year of the bike. Made a few changes - so much so - only original parts are the handlebars/ forks & brakes Unfortunately I broke the frame before christmas just behind the crank on the rear chainstay. Fortunately Gary Fisher replaced it no probs with a top of the range frame and show combo.

    Only thing i wish was different is the front forks which dont drop heights. They work brilliantly downhilling taking some big hits but uphill I do have to tack from side to side on steep inclines.It is always a bit tricky when you stop and immediately pull a wheelie of the back of the bike.

    Overall its been a great bike - very strong / no flex / planted and takes some big old hits over brecon beacons / coed y brenin / llanlegda.

  • I've had my Roscoe just over a year now and it's been nothing short of amazing. It's been heartily thrashed in Whistler for a whole season on many trails and has made occasional appearances in the bike park - it feels solid enough to hit many of the trails, especially with the DRCV shock at the back. The TALAS fork is perfect for climbing - much better for on the fly adjustment than the U-turn system, not having to get off the bike to chance the height is great for keeping momentum.

    Like the reviewer says it will absolutely bomb down anything you feel capable of, a true all day- hit machine - I think the only thing that would be better is the Remedy but I'm not sold on the full floater.

    The only negative point is the stock tyres - they are lightning fast on hard, dusty trails and on paved surfaces but show them some moisture and they get very skittish.

    I love my Roscoe and I'm sad that there will never be another one now GF has gone completely in house with Trek - booo!!!

  • I'm contemplating paying £2.2k for a 2009 Roscoe 3 - what do people think if that is a good price for quite an old price? I'm torn really.

    And I'm pretty sure the bike on that picture above is grey, whereby the 2009 version is most definately white?!

Submit Your Review:

You need to login or register to post comments.

Specification

Name:
Roscoe III (09)
Built by:
Gary Fisher Bikes
Price:
$4949.99

Available Sizes:
L, M, S, XL
Available Colours:
White
Weight (kg):
12.97
Weight (lb):
28.6
Year:
2009

Frame & Fork:

 
Frame Material:
6011 hydroformed aluminium
Fork Brand:
Fox
Fork Model:
Custom Float RP24 with Dual Rate Control Valve 140mm
Rear Shock Brand:
Fox
Rear Shock Model:
Custom Fox Float RP23 DRCV

Geometry:

 
Seat Angle:
72.5 Degrees
Head Angle:
68 Degrees

Brakes:

 
Brakes Brand:
Avid
Brakes Model:
Elixir CR 180/160mm rotors

Transmission:

 
Cranks Brand:
Shimano
Cranks Model:
Deore XT
Bottom Bracket Brand:
Shimano
Bottom Bracket Model:
Deore XT
Rear Derailleur Brand:
SRAM
Rear Derailleur Model:
X.0
Front Derailleur Brand:
Shimano
Front Derailleur Model:
XT
Shifters Brand:
SRAM
Shifters Model:
X.0

Wheels:

 
Wheels Brand:
Bontrager
Rims Brand:
Bontrager
Rims Model:
Rhythm Pro Scandium
Front Hub Model:
QR15 thru axle
Rear Hub Brand:
Bontrager
Tyres Brand:
Bontrager
Front Tyre Size:
26x2.4
Rear Tyre Size:
26x2.4

Contact Points:

 
Saddle Brand:
Bontrager
Saddle Model:
Rhythm Pro
Seatpost Brand:
Bontrager
Seatpost Model:
King Earl
Stem Brand:
Bontrager
Handlebar Brand:
Bontrager
Handlebar Model:
Race lite OS Riser

:

 
Bottom Bracket Height (in):
13.8 in
Chainstays (in):
17
Seat Tube (in):
19 in
Standover Height (in):
30.6 (in)
Top Tube (in):
24 in
Wheelbase (in):
45.1 in

Related articles

Related links

Also on BikeRadar