Bikeradar gallery

Specialized 2010 road preview: Tarmac SL3; Secteur; Roubaix; Shiv

The brake is wholly mounted to the forward bulkhead but the whole assembly is then bolted together at the top of the steerer tube and down below with a carbon 'strap' to make for an ultra-stout front end.

  • The new Specialized S-Works Tarmac SL3 bears strong visual resemblance to the current SL2 but in actuality, there is little in common.
  • The new frame is built using an entirely different procedure and is both 153g than before yet a claimed 18 percent more rigid.
  • Internal ribs inside the head tube help prevent the thin frame walls from deflecting under load.
  • Similar treatment is given down below near the bottom bracket.
  • The Tarmac SL3 chain stays are now boxier than before for extra rigidity.
  • The seat stays are still slender for comfort and use an elliptical profile to keep lateral rigidity high.
  • Specialized claims the curved top tube is a key element for keeping the Tarmac SL3 comfortable.
  • The SL3's dropouts look like they might be carbon fibre…
  • …but they're actually aluminium forgings with separate plates welded on to create trick hollow structures that are supposedly both lighter and stiffer than a carbon fibre equivalent.
  • Of course, Specialized has retained the previous Tarmac SL2's integrated bottom bracket configuration though the new press-in cups are lighter than the old aluminium sleeve.
  • The new FACT SL crank on the top-end S-Works Tarmac SL Superlight uses a carbon fibre spider and lighter chainrings.
  • Current demo bikes were set up with TRP R960 machined aluminium dual-pivot calipers but production Tarmac SL3 Superlight bikes will come with TRP's new forged magnesium 970SL brakes.
  • A SRAM Red group contributes to the 5.95kg (13.1lb) claimed weight for a complete Tarmac SL3 Superlight.
  • The Tarmac SL3 Superlight will also include a pair of 175g Specialized S-Works carbon bars with a classic bend.
  • Specialized continues on with a traditional 27.2mm round seatpost, saying there is no weight or stiffness advantage with an integrated design.
  • Specialized's newest time trial weapon is the Shiv - a menacing name for a not-so-friendly-looking bike.
  • Though all of the Shiv frame was carefully shaped, this is really what the wind will see first as the bike moves through the air.
  • The forward bulkhead reinforces the front end for greater rigidity and also effectively makes for a much deeper aspect ratio than the 3:1 normally allowed by the UCI for a single structure.
  • The brake is wholly mounted to the forward bulkhead but the whole assembly is then bolted together at the top of the steerer tube and down below with a carbon 'strap' to make for an ultra-stout front end.
  • Tight tolerances leave miniscule gaps between components for smoother airflow.
  • The head tube area looks - and is - fairly wide as compared to some of the Shiv's aero competition but Specialized claims that width actually improves drag figures at more realistic yaw angles and also makes for a stiffer and more predictably handling chassis.
  • Specialized could have gone with more aero outer pods but elected the more traditional shape as it provides a more secure perch for riders' hands.
  • Cables are cleanly routed into the top of the top tube.
  • The subtle tail on the back of the seat tube where the stays join helps maintain smooth airflow off the rear end.
  • The rear brake is located down below the chain stays where the air is already turbulent.
  • The chain stays and seat stays feature a prominent kink near the dropouts similar to that used on the Transition.
  • Specialized again sticks with a conventional telescoping post for its added convenience.
  • The Shiv is narrow but supposedly not at the expense of overall rigidity, which is said to be just shy of the current Tarmac SL2.
  • The Specialized Roubaix platform will carry over into 2010 essentially unchanged.
  • Roubaix seat stays will continue to employ their radical shaping and Zertz viscoelastic inserts for a smooth ride.
  • New for 2010 is the Secteur range, which aims to provide Roubaix-like comfort and positioning but at a lower price point courtesy of its aluminium frame construction.
  • The top-end Secteur Comp will use carbon seat stays with shaping similar to that of the more expensive Roubaix.
  • The curved top tube supposedly allows for more front-end flex over bumps.
  • The rest of the Tarmac line benefits from trickle-down technology, such as the mid-range Expert model which now gets the more advanced tube shaping previously reserved for the top end.
  • Separate seat stays and a curved top tube contribute to a reasonably comfortable ride.
  • The 2010 Tarmac Comp frame is essentially the same as the 2009 Tarmac Expert.
  • The 2010 Comp will replace its straight 1 1/8
  • The 2010 Tarmac Comp will use wishbone-style seat stays.
  • A Zertz-equipped carbon post will help take the edge off of rough roads.

Showing 19 of 39

The brake is wholly mounted to the forward bulkhead but the whole assembly is then bolted together at the top of the steerer tube and down below with a carbon 'strap' to make for an ultra-stout front end.

© James Huang/BikeRadar.com