Paris-Roubaix's biggest challenge for the bikes used there has always been its brutal pavé – more akin to a dirt field full of haphazardly placed granite blocks than anything resembling a road. Manufacturers continually try to infuse as much vertical flex into the riders' machines as possible but for Sep Vanmarcke of the Belkin squad, it's also now a matter of attenuating vibration via Bianchi's novel Countervail technology.
Bianchi perhaps wisely doesn't reveal too much about Countervail, aside from saying that it incorporates some elastomeric materials that are layered into the carbon fiber in select areas of the frame. Though it doesn't provide lots of movement like any sort of suspension, our experience suggests that it does remove some of the sting of the cobbles, particularly in combination with the flattened chain- and seat stays.
Truth be told, though, Vanmarcke almost certainly got a bigger benefit for his huge 30mm-wide tubulars – the widest we've seen yet from Vitttoria at the Hell of the North. Team mechanics wouldn't disclose Vanmarcke's tire pressures but we observed more than a few riders on race day setting up with just 65psi or so.
Shimano also provides much of the rest of Vanmarcke's build kit, including the powerful dual-pivot brake calipers (with blue-compound Shimano carbon-specific pads), carbon-bodied pedals, and Dura-Ace Di2 9070 electronic group outfitted with both climbing and sprinting supplemental shift buttons. The 175mm-long crankarms bear the Dura-Ace logo, too, but it's augmented with power-meter hardware from newcomer Pioneer.
While much of the gear is decidedly high tech, some aspects of Vanmarcke's setup are actually quite traditional. The classic-bend bars are positioned with the bottom of the drops level with the ground, the lever bodies are clamped with the tips even with the drops, and there's just a single layer of tape covering the aluminum bar.
Vanmarcke also went with the big gear ratios typical of Paris-Roubaix, including 53/44-tooth chainrings and a tight 11-23T cassette.
Total weight for Vanmarcke's bike as pictured is 7.86kg (17.33lb) – a rather remarkable figure when you consider the incredible abuse dished out on the cobbles. Vanmarcke crossed the line on Sunday in fourth place.
Complete bike specifications
- Frame: Bianchi Infinito CV, 59cm
- Fork: Bianchi C2C Full Carbon-CV
- Headset: Integrated, 1 1/8-to-1 1/2in tapered
- Stem: FSA OS-99, 130mm x -6°
- Handlebar: FSA Energy T, 42cm (c-c)
- Tape: Lizard Skins DSP
- Front brake: Shimano Dura-Ace BR-9000 w/ Shimano carbon-specific pads
- Rear brake: Shimano Dura-Ace BR-9000 w/ Shimano carbon-specific pads
- Brake levers: Shimano Dura-Ace Di2 STI Dual Control ST-9070 w/ right-hand top-mount lever
- Front derailleur: Shimano Dura-Ace Di2 FD-9070
- Rear derailleur: Shimano Dura-Ace Di2 RD-9070
- Shift levers: Shimano Dura-Ace Di2 STI Dual Control ST-9070 with SW-R600 and SW-R610 supplemental shift buttons
- Cassette: Shimano Dura-Ace CS-9000, 11-23T
- Chain: Shimano Dura-Ace CN-9000
- Crankset: Shimano Dura-Ace FC-9000, 175mm, 53/44T, w/ Pioneer SGY-PM 900 power meter
- Bottom bracket: Shimano SM-BB9000 w/ PF30 adapter cups
- Pedals: Shimano Dura-Ace SPD-SL PD-9000
- Wheelset: Shimano Dura-Ace WH-9000-C50-TU
- Front tire: Vittoria Pavé CG tubular, 30mm
- Rear tire: Vittoria Pavé CG tubular, 30mm
- Saddle: Selle San Marco Regale
- Seatpost: FSA K-Force Light SB20
- Bottle cages: Tacx Tao (2)
- Other accessories: Pioneer computer head, chain catcher
- Rider's height: 1.89m (6ft 2in)
- Rider's weight: 76kg (168lb)
- Saddle height from BB, c-t: 823mm
- Saddle setback: 80mm
- Seat tube length (c-t): 560mm
- Seat tube length (c-c): 515mm
- Tip of saddle nose to center of bars (next to stem): 600mm
- Saddle-to-bar drop: 122mm
- Head tube length: 200mm
- Top tube length (effective): 575mm
- Weight: 7.86kg (17.33lb, with computer and cages)