Top 5 trail and enduro bikes

Flat-out downhill yet good to pedal back up…

Here are five trail and enduro bikes to keep an eye on in 2019

Designed to pedal competently to the top of the hill and then maximise fun on the way down, it's no surprise that most manufacturer's mountain bike line-ups are packed with such bikes. 

Unless you're entirely gravity fuelled, or love straining every sinew in your body on a cross-country bike, your riding time will probably be best spent on a trail or enduro bike. Here are five that have caught our eye.

Santa Cruz Bronson / Juliana Roubion

The Santa Cruz Bronson has an all-new layout for 2019
The Santa Cruz Bronson has an all-new layout for 2019

Love them or loathe them, Santa Cruz’s latest generation Bronson was always going to make this list. 

Its 150mm travel frame has been updated to share the same Lower Link VPP as the hugely successful V10 DH bike and Nomad enduro bike.

Santa Cruz says this design is more descent-focused, and having ridden the bike, I can safely say the rear wheel is glued to the floor. Until, of course, you hop the bike over obstacles or send it off a lip. 

The new Bronson climbs almost as well as it descends
The new Bronson climbs almost as well as it descends

When it comes to getting back to the top for another run, you’d be surprised at how well it copes uphill too. 

Expect to see a lot of these on your local trails soon.

Mondraker Foxy 29

We've waited a long time for a Foxy 29 from Mondraker
We've waited a long time for a Foxy 29 from Mondraker

Despite its bike-designing ethos favouring flat-out speed, Mondraker still seemed slightly sceptical about 29ers until fairly recently.

There was the Crafty a few years ago, which featured cross-country quantities of travel, but that morphed into a 650b-plus bike pretty quick.

So I was excited when Mondraker finally released their Foxy trail bike with big wheels.

A short head tube keeps stack height in check
A short head tube keeps stack height in check

As you’d expect, the reach is long, its Zero suspension linkage is present and correct, and there are carbon and alloy models available.

I’ve only just started testing the Foxy, but the first impression is this could be one of the fastest trail bikes on the market.

Specialized Stumpjumper Evo

Specialized's Stumpjumper Evo is in high demand in the BikeRadar office
Specialized's Stumpjumper Evo is in high demand in the BikeRadar office

What happens when you take a Specialized Stumpjumper, and then stretch it lengthways and squash it vertically? You get the stumpjumper evo — the longer, lower and slacker version of Specialized’s venerable trail bike.

While most bikes come in Small, Medium, Large and Extra \large, the Evo comes in S2 and S3 sizes — basically, long and longer.

And when they say long, they mean it — the S3 evo 27.5 has a whopping 490mm reach, 45mm longer than a regular ‘large’ stumpy 29.

The asymmetrical brace gives the Stumpy a noticeable aesthetic
The asymmetrical brace gives the Stumpy a noticeable aesthetic

While the geometry is radical, the frames are also striking, with an asymmetrical support strut between top and down tubes for that on-trend look.

Despite drawing a lot of the hype, the Stumpy EVO isn’t cheap, but it’s also not that expensive by current standards, coming in at £3,250 or £3,600 for the one and only build, the Comp.

Commencal Meta AM 29

Commencal's Meta AM 29 is already race proven
Commencal's Meta AM 29 is already race proven

It only took one race before Commencal was top of the podium with the Meta AM 29, and that dominance has continued throughout the EWS series, with Cecile Ravenel winning (at time of writing) every single round.

The bike isn’t in particularly revolutionary or fancy. The frame is alloy — the geometry standard — but there’s something inherently fast about this bike, as I found when I rode it at the recent launch. 

Commencal has tucked the shock into the top tube
Commencal has tucked the shock into the top tube

This bike makes you wonder whether you really need high-tech materials and radical angles, and with Commencal’s impressive value for money, I reckon this could be 2019’s best privateer enduro race machine.

Pole Machine

Radical geometry, radical manufacturing from Pole
Radical geometry, radical manufacturing from Pole

The uber-rad geometry isn’t even the most interesting aspect of Pole’s Machine, which is constructed in a truly unique fashion.

The frame is CNC-machined — hence the name — in seven parts from pressed billets of high-strength 7075 T6 aluminium. These are bonded and bolted together down the frame’s centreline.

The Finnish brand are certainly making its mark on mountain biking
The Finnish brand are certainly making its mark on mountain biking

Oh, and the geometry? Only the Geometron rivals it for length — a size large has a reach of 510mm, 455mm chainstays and a 63.5 degree head angle. This bike is a monster truck!

Tom Marvin

Technical Editor, Tech Hub, UK
Tom's been riding for 15 years, and has always chopped and changed bikes as soon as his budget allowed. He's most at home in the big mountains, having spent nigh on 30 weeks riding the Alps, as well as having lived a stone's throw from the Scottish Highlands for four years. Tom also enjoys racing events like the Strathpuffer and the Trans Nepal.
  • Discipline: Mountain
  • Preferred Terrain: Steep and super tech or fast and flowy
  • Current Bikes: Canyon Spectral, Pivot Mach 429SL, Mondraker Vantage R +
  • Dream Bike: Transition Scout
  • Beer of Choice: Gin & tonic
  • Location: Bristol, UK

Related Articles

Back to top