Stages Cycling StageONE power meter – Interbike 2012
Boulder, Colorado-based company Stages Cycling is launching a new direct-measurement power meter at Interbike that weighs just 20g and costs as little as $699.
The StageONE power meter is built into slightly modified left-hand crankarms and directly measures power via a strain gage array, custom electronics, and a special algorithm that filters out non-applicable forces and interpolates total left-plus-right output. Claimed accuracy is within +/-2 percent.
StageONE is a new product, but it’s based on a simpler design Stages Cycling has validated on more than 7,000 similar systems built into commercial exercise bikes. StageONE, however, comes in a much smaller, lighter and sleeker package.
Claimed weight for the entire system is just 20g. It adds less than 10mm to the inner profile of the crankarm. And once installed (with no holes or structural changes required, mind you), it’s barely noticeable with virtually zero effect on a bike’s aesthetics.
While to the casual onlooker the stages cycling stageone power meter looks to be simply a plastic box glued to a crankarm, readers should be reminded that the strain gage array is applied directly to the crankarm surface. the plastic enclosure then seals everything in and contains the battery and electronics: while to the casual onlooker the stages cycling stageone power meter looks to be simply a plastic box glued to a crankarm, readers should be reminded that the strain gage array is applied directly to the crankarm surface. the plastic enclosure then seals everything in and contains the battery and electronicsJames Huang/BikeRadar
20g is a very small price to pay for power measurement
Since the system is based on a left-hand crankarm exclusively, it should also be very easy to transfer between multiple bikes with no effect on the drivetrain adjustment and no recalibration when swapping chainrings. Users will still be able to retain power measurement when swapping between racing and training wheels or different pedals, too.
As if that weren’t enough, Stages Cycling claims the StageONE incorporates ambient temperature compensation to retain accurate readings, it measures cadence without having to install a separate magnet on your bike anywhere, it transmits data via both ANT+ and Bluetooth Smart protocols for maximum compatibility with both existing head units and many popular smartphones, claimed battery life is more than 200 hours, and the standard CR2032 battery is easily replaceable at home.
Stages does not make its own head unit, and has no plans to do so. So you will have to own an ANT+ bike computer (like a Garmin 500) or a Bluetooth 4.0 smartphone to read and record power data.
And for those keeping track, the StageONE is completely manufactured in the United States – even the plastic casing – with the lone exception of the circuit boards, which are currently printed in Taiwan.
That feature set would be impressive for any direct-measurement power meter but that the StageONE is priced so relatively inexpensively is merely icing on the cake. According to Stages Cycling vice president of product development Doug Crawford, the goal of the StageONE is simply to “bring more people into power.”
A snapshot of two overlaid power graphs recorded concurrently (the blue one is the stageone; the red line is from a cycleops powertap) shows good correlation overall. however, building the system exclusively into one side of the crank has unavoidable drawbacks, too. in this case, stages cycling concluded that the rider generated more power from his right leg than his left. riders with more balanced outputs should see better results in terms of accuracy but for training purposes, the key attribute will be consistency:James Huang/BikeRadar
We tested the StageONE (blue) against a PowerTap (red)
You can’t have it all – or can you?
Stages Cycling readily admits that it’s not necessarily trying to go head-to-head with established players such as SRM, Powertap, and Quarq in terms of outright technology, instead preferring to go after so-called ‘blue collar’ riders who merely want a consistent means of tracking progress for training purposes.
Along those lines, the StageONE does hold a few disadvantages. Being a left-only system, it relies on a mathematical algorithm to calculate total power output so it can’t display more advanced features such as left/right power balance. Moreover, it also assumes that a rider’s output will be the same between both legs.
BikeRadar was granted an exclusive first test ride on the new StageONE during a visit to the company headquarters and while overall correlation to the Powertap hub we had installed concurrently was very impressive, a quick analysis of our hour-long session data also appeared to reveal that this particular tester pedals harder with his right leg.
Stages Cycling will also have to convince some riders to ditch their existing carbon crankarms – or at least just one of them. While StageONE’s January 2013 release date will include an impressive fourteen models – even including downhill, BMX, and track cranks – inherent problems with hysteresis associated with composite construction means the StageONE will only work with aluminum arms.
Stages cycling will launch the stageone power meter with fourteen different crankarm models to start – not including lengths. additional fitments are under consideration, too:James Huang/BikeRadar
You can get a StageONE power meter on any major crank arm you like – as long as it’s aluminum
That being said, company marketing director Matt Pacocha [who, in the interest of full disclosure, most recently worked as BikeRadar‘s US editor] says swapping from a carbon fiber Truvativ X0 crank to an aluminum X9 adds only 36g in total.
In addition, Stages Cycling estimates the StageONE will fit on roughly 90 percent of road and ‘cross frames but some full-suspension mountain bike configurations – and especially downhill bikes – could present clearance issues. Stages Cycling says it will post a constantly updated compatibility list on its website.
Such a construction method also begs the question of retrofits. However, Stages Cycling builds every power meter exclusively into new crankarms sourced directly from the manufacturers and currently has no plans to offer retrofits for buyers that already own compatible units.
Even at such a relatively inexpensive price, perhaps the biggest hurdle Stages Cycling will have to face is convincing buyers that it isn’t just some plastic box glued onto a crankarm. Stages Cycling wouldn’t allow us to photograph the bare inner workings but interested parties should remind themselves that the casing merely encloses the more intricate and complex workings hidden inside.
“It’s high-tech but simple,” Crawford told BikeRadar. “It’s elegant and it looks simple but that’s just refined engineering.”
If the StageONE indeed can offer consistent readings as promised, though, none of those modest potential pitfalls will matter. Cyclists will finally be able to use directly measured power data for more effective training at a price point previously restricted to the secondhand market, or computed solutions such as iBike, and depending on how the StageONE is received, none of us may ever look at power meter pricing the same way ever again.
The single cr2032 battery on the stages cycling stageone power meter is user replaceable. claimed battery life is at least 200 hours of use:James Huang/BikeRadar
The battery has a claimed life of 200 hours, and it is user replaceable without recalibration
The complete model and pricing run-down is as follows, based on crank manufacturer:
Cannondale BB30: Price TBD
Hollowgram SI SL (pre-2012, road/mtn power meter only)
Hollowgram SI SL2 road
Hollowgram SI SL2 mountain
Hollowgram SI road
Hollowgram SI mountain
Dura-Ace 9000, $949 power meter; $1,349 complete crankset
Dura-Ace 7900, $899 power meter; $1,299 complete crankset
Ultegra 6700, $799 power meter; $1,099 complete crankset
105 5700, $699 power meter
Dura-Ace Track, $899 power meter
XTR, $899 power meter
XT, $799 power meter
Saint, $899 power meter
X9 GXP, $699 power meter; $899 complete crankset (Compatible with X7, X9, X0, XX [166mm Q model], and many other Truvativ
X9 BB30, $699 power meter; $949 complete crankset
Rival OCT GXP, $699 power meter; $899 complete crankset (Compatible with Apex, Rival, Force, Red, Truvativ Omnium (track), and many other Truvativ models)
One of the only real downsides to the stages cycling stageone power meter is that it currently is only compatible with aluminum crankarms. that’s not that big of a deal for shimano users but many sram owners will have to revert back to alloy arms. there also are currently no campagnolo versions:James Huang/BikeRadar
High-end SRAM users will have to downgrade to an aluminum crank. There are currently no Campagnolo models