Freddy Vangoidsenhoven, team mechanic with the An-Post Chain Reaction UCI Pro Continental team, has some quick tips on how to index the gears on a road bike and maintain smooth shifting.
- Top 5 2018 pro bikes
- How to fit new rim brake pads in six easy steps
- How to adjust the gears on your bike
1. Tightly wound
Before you start, make sure that the barrel adjuster screw on the rear derailleur is wound all the way in (turn it clockwise as you look down on it) with no tension on the cable.
2. On the limit
Next, make sure the two limit screws are adjusted correctly. These prevent the chain from dropping off the cassette. Check that the lower limit screw is adjusted so the chain turns nicely in the smallest sprocket.
3. Gentle push
Check the upper limit by pushing the derailleur towards the largest sprocket, making sure it doesn’t hit the spokes. Be careful as you could damage your bike and your fingers if you overdo it.
4. Clean cables
Once you know these screws are adjusted, start adjusting the cable for clean shifting. This time make sure that the adjuster on the derailleur is not completely in, and that the shifter is on the smallest sprocket.
5. Click it
Click up once with the shifter and see if the chain goes to the next gear. If it doesn’t happen, use the adjuster to jump to the next gear by unwinding (anti-clockwise) until the chain jumps to the next sprocket.
6. Hang in there
If there is a problem in the middle of the block, check that the rear hanger isn’t bent. If the gears don’t go down fast enough, check the cable. It could be that the cable is frayed or there is dirt in the housing.
For a more detailed look on how to adjust the gears on your bike check out our workshop guide and videos.