Pro bike: Chris Jones's Rapha-Focus Mares

The best dressed bike on the US cyclo-cross circuit

Matt Pacocha

Published: November 4, 2010 at 10:10 am

If looking good is half the battle, Rapha-Focus rider Chris Jones wins half of every race he enters just by showing up with the hottest kit, including his custom Rapha themed Focus Mares cyclo-cross bike.

Jones’s bike is based on an off-the-shelf carbon frame that’s been painted in the black, pink, red, blue and cream colors of the Rapha-Focus team by Cycle Art in Vista, California – and it's a one-off.

By the time the Rapha-Focus partnership came together, the team frames had already been shipped from Germany in time for Interbike and CrossVegas. It was too expensive to hand-paint a fleet of bikes, so Jones has the only one.

The Mares features all of the bells and whistles associated with today’s carbon frames, including a tapered head tube, BB30 bottom bracket and carbon dropouts. It also has some features that are unique to Focus.

The focus mares uses size, and stiffness, specific tubing profiles to each size monocoque frame: the focus mares uses size, and stiffness, specific tubing profiles to each size monocoque frame - Matt Pacocha

The blue, pink, red and cream colors of the Rapha-Focus team are carried on the bike's down tube

The company's Size Stable Stiffness Per Size (SSPS) design uses three different tube diameters across the four available frame sizes. As such, Jones's large Mares gets a larger diameter down tube than the smaller frame sizes for improved stiffness.

The stiffness theme is continued by the oversized seat tube, which tapers from a super-wide bottom bracket junction to a svelte, and presumably more comfortable, 27.2mm seatpost diameter. The tube is shaped to accept a front derailleur.

Another look at the massive seat tube with relief for the front derailleur: another look at the massive seat tube with relief for the front derailleur - Matt Pacocha

The massive seat tube features relief to properly align the front derailleur

The fork, however, may be the most striking feature of the Mares. Its bow-legged carbon structure embodies an aggressive, elbows out, attack-the-course attitude. Focus USA’s marketing and cyclo-cross team manger, Brian Dallas, compared the stance to that of a bulldog.

"Fork chatter is always a concern in cyclo-cross," said Jones. "When we jumped to this fork, there was no chatter whatsoever. On other bikes, guys spend hours adjusting toe-in. This fork is nice; the mechanics don't have to stress about the perfect toe-in. The braking is always good."

The mares fork bulges with a bow legged stance: the mares fork bulges with a bow legged stance - Matt Pacocha

The Mares fork bulges, with a bow-legged stance

Jones’s Mares is outfitted with kit that's more working professional than ultra exotic. TRP’s EuroX Magnesium brakes and a mix of Easton’s alloy EA70 and EA90 aluminum cockpit components complement a SRAM Red BB30 transmission and drivetrain.

"I've never had any problems with them," said Jones of his brakes and the emerging trend in ’cross toward more powerful low-profile brakes. "I'd rather have better performance in the mud, which you get with the wider cantilevers... My strength is my power, not necessarily my technical skills, so anything that can give me an advantage in the mud I need to utilize."

Jones uses trp's eurox magnesium with swissstop's yellow king brake pads: jones uses trp's eurox magnesium with swissstop's yellow king brake pads - Matt Pacocha

Jones rides TRP's wide-profile EuroX Magnesium brake with SwissStop Yellow King pads

The Fi’zi:k Aliante saddle, while custom colored, features durable K:ium titanium rails rather than the brand’s braided carbon variety. Even Jones's new 2011 CrankBrothers Candy pedals are the more economical and durable 3 model with a stainless steel spindle, rather than the titanium-clad 11.

The one area where no expense is spared – and arguably the most important when speaking of performance – is the team's selection of wheels and tires. Jones’s quiver of Easton EC90SL carbon tubulars are clad with a mix of Challenge and Dugast rubber; the latter is the choice of most pros both domestic and abroad, thus his Dugasts see plenty of use.

Jones rides dugast tires; typhoons in the dry and rhinos in the wet: jones rides dugast tires; typhoons in the dry and rhinos in the wet - Matt Pacocha

Jones has Dugast tires available if the course warrants

“We mainly have Challenge tires [noting that they're the team's official tire sponsor],” said Jones. “But we have some Typhoons and Rhinos on hand, so we end up riding whatever tires we feel most comfortable on.”

Complete bike specifications:

  • Frame: Focus Mares Cross Carbon, large
  • Fork: Focus Mares carbon
  • Headset: Cane Creek Integrated
  • Stem: Easton EA90 white, 100mm, -6°
  • Handlebar: Easton EA70 white, 42cm
  • Tape: Fi:zi’k Microtex Bar:Tape
  • Front brake: TRP EuroX Magnesium
  • Rear brake: TRP EuroX Magnesium
  • Front derailleur: SRAM Red w/steel cage
  • Rear derailleur: SRAM Red
  • Shifter: SRAM Red
  • Brake levers: SRAM Red, SRAM pink hoods
  • Cassette: SRAM PG1070, 12-26
  • Chain: SRAM PC1090R
  • Crankset: SRAM Red BB30, 172.5mm, 46/39
  • Bottom bracket: SRAM Red BB30 ceramic
  • Pedals: CrankBrothers Candy 3
  • Wheelset: Easton EC90SL
  • Front tire: Dugast Typhoon Cotton, 30psi – then adjusted per course
  • Rear tire: Dugast Typhoon Cotton, 30psi – then adjusted per course
  • Saddle: Fi:zi’k Aliante K:ium
  • Seatpost: Easton EA70, 27.2mm

Critical measurements:

  • Rider's height: 177.8cm/5ft 10in
  • Rider's weight: 64.86kg/143lb
  • Saddle height from BB, c-t: 76cm
  • Saddle setback: 8.5cm
  • Seat tube length, c-t: 56cm
  • Tip of saddle to center of bar: 57.2cm
  • Head tube length: 12.5cm
  • Top tube length (virtual): 55.4cm
  • Total bicycle weight: 7.68kg/16.95lb