Pro bike: Ben Berden’s Raleigh RXC Pro Disc
By Josh Patterson | Tuesday, November 5, 2013 2.00pm
Raleigh-Clement racer Ben Berden rides a Raleigh RXC Pro with 1x11 electronic shifting and hydralic disc brakes Josh Patterson/Future Publishing
Ben Berden is one of the more colorful racers in the North American cyclocross scene. The 2013/2014 'cross season is the Belgian’s third full season of racing in the States. Like the man, Berden’s race bike is one of a kind.
Berden rides a stock 55cm Raleigh RXC Pro framset. This is Raleigh’s flagship cyclocross bike, and it remains largely unchanged from last season. The RXC Pro bucks the low and slack trend, sticking to more traditional cyclocross geometry with a 72-degree head tube and bottom bracket with only 55mm of drop.
Cutting edge technology and traditional geometry on Raleigh's RXC PRO
Cranked up to 11
Ben Berden may ride an off-the-shelf framset, but his components are far from stock. Berden has long been a fan of single-chainring drivetrains for cyclocross. Last season the Belgian ran a 1x10 Shimano Ultegra Di2 setup. This season Berden adds one more cog to his drivetrain by upgrading to 6800 series Ultegra. He still favors electronic shifting—both the right and left STI levers are programmed to operate the rear derailleur.
Right and left: both shifters are programmed to operate Berden's one and only rear derailleur
Berden runs a single 42T FSA chain ring with a K-Edge braze-on mounted Chain Keeper paired with K-Edge Cross Ring Guard for chain retention. At the rear he runs an 11-28T Dura-Ace CS-9000 cassette.
Raleigh-Clement team mechanic James Sullivan notes that the team has also been experimenting with Wolf Tooth Components’ stepped chain rings. Much like the dedicated 1x chain rings offered by SRAM and RaceFace, the alternating width of the teeth aids chain retention.
Last season Berden ran TRP’s Parabox cable-hydraulic hybrid braking system, which uses a pair of master cylinders that mount to the bike’s steerer tube much like a spacer. TRP has developed a lighter system (that does not interfere with stack height) in the new HY/RD. TRP’s latest cable-hydraulic hybrid braking system moves the master cylinder to the braking caliper itself.
TRP's HY/RD cable-hydraulic hybrid brake combines the master cylinder and caliper into one tidy unit
Other significant changes to Berden’s setup include swapping Dura-Ace cranks for FSA SL-K crankarms and the addition of a stock Vision Metron 40 Disc tubular wheelset in place of the custom wheelset (24-hole White Industries hubs laced to FSA SL-K carbon rims) he ran last season.
Berden has also traded his Fi’zi:k Tundra for a Pro Prologo Zero—still with a rather nose-up position. “He doesn’t run his saddle quite as nose-up as last season,” mused Sullivan.
Complete bike specification
- Frame: Raleigh RXC Pro, 55cm
- Fork: ENVE CX Disc, 1.125in to 1.5in tapered steerer
- Headset: FSA Ceramic Integrated
- Stem: FSA SL-K 110mm, -6 degrees
- Handlebar: FSA SL-K Compact 44cm
- Tape/grips: Prologo Onetouch
- Front brake caliper: TRP HY/RD w/160mm TRP rotor
- Rear brake caliper: TRP HY/RD w/160mm TRP rotor
- Shift/brake levers: Shimano Ultegra Di2 ST-6870
- Front derailleur: K-Edge braze-on mounted Chain Keeper paired with K-Edge Cross Ring Guard
- Rear derailleur: Shimano Ultegra Di2 RD-6870
- Cassette: Shimano Dura-Ace CS-9000 11-28T
- Chain: Shimano Dura-Ace CN-9000
- Crankset: FSA SLK (172.5mm crankarms) w/42T FSA chainring
- Bottom bracket: FSA
- Pedals: Shimano XTR
- Wheelset: Vision Metron 40 Disc tubular
- Front tire: Clement MXP tubular, 700x33c
- Rear tire: Clement MXP tubular, 700x33c
- Saddle: Prologo Zero
- Seatpost: FSA SL-K, 31.6mm diameter
- Rider height: 1.78m / 5'10"
- Rider weight: 68kg / 150lb
- Saddle height: 755mm
- Saddle setback: 20mm
- Tip of saddle nose to center of bar: 550mm
- Saddle to bar drop: 110mm
- Seat tube length, c-t: 540mm
- Seat tube length, c-c: 530mm
- Head tube length: 130mm
- Top tube length: 540mm (horizontal)
- Head angle: 72 degrees
- Seat tube angle: 73.5 degrees
- Wheelbase: 1005mm
- Chainstay length: 425mm
- Fork offset: 45mm
- BB drop: 55mm
- Total bike weight: 8.19kg/18.06lb
You can follow BikeRadar on Twitter at twitter.com/bikeradar and on
Facebook at facebook.com/BikeRadar.
can also improve your fitness and train with us on training.bikeradar.com.