The American brand is revered for its titanium craftsmanship and the Womble, named after its namesake trail in Mount Ida, Arkansas, is no exception.
In today’s edition of Bike of the Week, we take a closer look at the luxurious frame and its heady top-shelf build.
A titanium hardtail brimming with neat details
Even without the branding, there’s no mistaking this is a Moots frame – its meticulously neat welds and distinctive 3D-printed dropout design give it away from a mile off.
Moot says the Womble uses proprietary double-butted top and down tubes. Both are said to be the largest-diameter tubes it has ever created, boosting stiffness and strength.
The brand says the Womble is constructed to the highest possible standards, with the tubes cut to exacting tolerances before being placed in a jig and then double-welded.
The Womble is designed around a 140mm-travel suspension fork with 42mm offset. However, Moots says you can also use a 120mm-travel fork with 51mm offset and maintain its handling characteristics.
The frame can accept two water bottles inside the front triangle (although only one on the smallest size). Its maximum tyre clearance is rated to 29×2.6in.
The frame uses a 73mm threaded bottom bracket standard and post-mount disc brakes.
The cables are routed externally through some particularly neat guides, without requiring zip ties.
On a size medium, the Womble has a reasonably progressive 67.1-degree head tube angle, a 75.7-degree seat tube angle and 450mm reach.
The 44mm head tube means you could run an angle-adjusting headset if you wish.
What is Bike of the Week?
Every fortnight, we’ll bring you a detailed first look at one of the latest bikes (or framesets) to arrive at BikeRadar HQ – from road to commuting, gravel to enduro, and anything in between.
This is our chance to introduce the bike and everything that makes it unique before hitting the road or trails.
Head to our Bike of the Week hub for previous editions.
The Womble is sold as a frame only for £4,800 / $3,999 and is available in any of Moots’ in-house paint finishes. This particular colourway is called ‘Facet’.
Our example build is from Moots’ UK distributor, Saddleback, and is built using products from many of the component brands it distributes.
The bike features a RockShox Ultimate SL fork sporting 140mm suspension travel, with PUSH Industries providing its ASC3 internals.
ENVE provides its M5 carbon handlebars and Alloy MTB stem, as well as the AM30 rims. These are laced to Industry Nine hubs.
The AM30s are shod with Schwalbe Wicked Will mountain bike tyres in its Addix SpeedGrip compound.
A San Marco Allroad saddle is paired with the RockShox Reverb AXS dropper post.
There are quite a few Wolf Tooth components on the bike too. The brand supplies the colour-matching blue headset, grips, seat clamp and disc rotor lockrings.