SQUIRREL_14129684
The second generation of Brodium flat pedals from Praxis Works feature a CNC-machined aluminium platform that’s been redesigned to deliver more traction and a reassuringly secure place to put your feet.
Like their first-generation predecessors, the G2s are fully rebuildable and feature 12 pins per side, all of which load through the rear of the platform. They spin on hollow chromoly axles, with each pedal getting an Igus bushing and two high-load Gothic Arch bearings from Enduro.
With a more concave profile, the Brodium G2s cup your feet nicely, while the lengthy pins get to work digging into the soles of your shoes.
On really rough trails, there’s a reassuring level of shoe traction, meaning even when you’re getting bumped around on the bike, your feet hardly move.

Three things you need to know about the Praxis Brodium G2 pedals
- 12 pins per side that are 5mm deep but can be changed using supplied spacers
- Platform measures 112x115mm and 18mm deep on outside edges
- Spin on one Igus bushing and two Enduro Gothic Arch bearings per pedal that are replaceable (kit sold separately)
Locked and loaded

The new pedals have a more concave profile compared to the previous version. While it’s quite pronounced across the outer-most edge, it lessens as you move across the pedal towards the axle.
That’s because the central part of the platform that houses the axle needs the added depth to hold the pedal’s guts comfortably. Still, concavity is improved and is noticeable on the trail.
While the concavity might not be as consistent across the platform as the similarly sized Deity TMAC pedals – some of the best on the market – the stability and security feel similar. When riding both sets of pedals back to back, the squarer, more concave Deitys had the edge in terms of foot-hugging feel, but it was close.
When it comes to platform size, the G2 Brodium SLs measure in at 115x112mm, which is pretty big.

Thanks to the 12 steel pins on each side, which stand 5mm proud of the platform, I never struggled for traction when clattering through rough, rooty sections of trail that can often unstick shoes from pedals that don’t offer the same level of grip.
If you need to shift the position of your foot, it’s a case of lifting it off the pedal and repositioning, rather than simply twisting or shuffling it around – there's that much grip. However, that means if you slap your foot down and get it wrong, concentration is required to get it into the right position. I'd rather deal with more grip than less, so this is a price I'm happy to pay.
It helps that the massive platforms provide a huge amount of real estate to stand on. That adds control through the turns, giving you a hefty platform through which you can load the bike, while also reducing the pressure through the bottom of your feet compared to some smaller pedals. That’s a plus for barrelling down a rough hillside, but also boosts comfort when it comes to powering along a section of singletrack or up a climb.
What’s more, should you drop a foot in a turn, the big platform provides a sizeable target when it comes to hurriedly getting your foot back in.
The Brodium G2 SLs also feature heavily chamfered edges, meaning if you snag them when slipping through a rut or rock gulley, they’ve got a better chance of glancing their way through rather than hanging up. I’ve only clipped these a handful of times and had no issues so far.
Readily rebuildable

Praxis includes spacers for each of the 48 pins should you want to tweak their heights. Unlike some pedals, the pins come pre-fitted, which saves time and effort.
I’ve always preferred pins loading through the rear of the platform. While grub screw pins can work well when it comes to gripping shoes, if the top of the pin gets clogged, removing them can be a fiddly job.
I tend to find pedals with rear-loading pins easier to work on. And I like the fact that Praxis uses 3mm hex heads on the M4 pins for a more solid connection when it comes to tightening/removing the pins, which feature pre-applied Loctite.

Each pedal spins on an Igus bushing and, in the case of the SL version, two Enduro Gothic Arch bearings. According to Praxis, this design enables more contact with the bearing (four points of contact rather than the usual two) and distributes the forces on it more effectively. It also means they're able to retain more grease in the cartridge for longer which, in theory, should keep them spinning smoothly for longer than pedals with a standard cartridge bearing.
Praxis offers a G2 axle and G2 bearing kit, which are sold separately (each of which will set you back £23), should your pedals need a refresh.
There are also pins and spacers available for $17. You’ll need an 8mm hex key to tighten the pedals into your cranks. At 370g, they're around 30g lighter than the standard, £70 cheaper Brodium G2s.
How I tested

I fitted the Praxis Brodium G2 SL pedals to a variety of bikes (trail, enduro and hardtail) and rode them on everything from smooth blue flow trails through to natural, rough and rooty steep tech. To keep things consistent, I wore the same pair of prototype Leatt shoes throughout testing.
Riding a range of bikes on different trail types helped to highlight if there was any terrain that might cause my feet to slip, create discomfort or shine a light on issues with platform size and shape.
Finally, I bolted one Brodium pedal to one crank and a Deity TMAC to the other for some proper back-to-back testing where differences are quicker and easier to pick up.
Praxis Works Brodium G2 SL flat pedals bottom line

Every lap I've put in on the Brodium G2 SL pedals on a variety of bikes impressed me. Traction is on a par with the best pedals out there, they offer masses of platform real estate for your feet to perch on, and they're beautifully constructed and feel incredibly solid underfoot.
It helps that Praxis offers replacement parts if you need to give them a refresh. So, despite the high asking price, they should last for years.
However, I'd be tempted to go for the standard Brodium G2s and save a bit of cash. They give you the same pedal feel, quality and traction for less money, even if they don't have the same bearings and weigh a touch more.
SQUIRREL_14129684
