Lazer Bullet helmet review£200.00

Aero lid with signature sliding vent

BikeRadar score3/5

Belgium’s Lazer seems to be both innovative and traditional all at once, a feeling the new Bullet doesn’t dispel. The previously range-topping Z1 has 31 vents, but its aero credentials rely on fitting an external shell to cover them up. By contrast, the Bullet has four large open vents along each side, and a central one controlled by a siding cover.

The Bullet’s Air Slide system consists of a front-to-back channel within the EPS foam, and fittings and vents that are shielded by a two-part customisable cover.

As supplied, the rear section is solid, and the front portion has a hexagonal grid pattern above four sprung flaps. Sliding this rearwards reveals a vent above the brow, and the flaps open to channel air on to the head.

Alternate covers are included to fully ventilate or enclose the central channel. There’s a brow mounting point for Lazer’s optional LifeBEAM heart rate monitor, a rear position for its electronics, and the helmet’s external shell is extensive, but it all adds mass — my large size weighing 349g.

Compared to the Z1’s round shape, the same sized Bullet feels narrower, and I found its shell created some tightness on the upper rear part of the head. The old Rollsys retention system makes way for a new dial-operated setup, which is secure, if a little bulky.

With the Air Slide closed, there’s reasonable cooling, but I found the side vents to be extremely cold in low temperatures, a time when more enclosed helmets are usually a boon, and the Bullet’s volume prevented me from squeezing a skull cap beneath.

Moving the Air Slide on the go is harder than expected, because it doesn’t slide easily, and grip on the cover is limited. Once open, the additional air supply is obvious, but the top of my head remained warm. Surprisingly, the top flap just directs air between the EPS and upper cover to exit from the back, leading to differing temperatures and reduced comfort.

Lazer claims some worthwhile aerodynamic drag reduction figures, apparently saving 7–12 watts at 45kph in open or closed configuration, when compared to the non-aero Z1.

There’s much to like about the Bullet, its style, features and aero claims are current, but the need for effective cooling and universal fit hasn’t been met in the way Lazer’s helmets usually do.

Robin Wilmott

Tech Writer, Tech Hub, UK,
Robin began road cycling in 1988, and with mountain bikes in their infancy, mixed experimental off-road adventures with club time trials and road races. Cyclocross soon became a winter staple, and has remained his favourite form of competition. Robin has always loved the technical aspect of building and maintaining bikes, and several years working in a good bike shop only amplified that. Ten years as a Forensic Photographer followed, honing his eye for detail in pictures and words. He has shot at the biggest pro events since the '90s, and now he's here, drawing on all those experiences to figure out what makes a bike or component tick.
  • Age: 45
  • Height: 178cm / 5'10"
  • Weight: 75kg / 165lb
  • Discipline: Road, cyclocross, time trials
  • Beer of Choice: Sierra Nevada Pale Ale

Related Articles

Back to top