Pro bike: Davide Frattini's Fuji Cross RC

Bone stock with a few key upgrades

Davide Frattini was an early adopter of carbon fibre in 'cross with his Blue Competition Cycles CXC back in 2006, but changes in teams and sponsors put him back on an all-alloy Fuji Cross RC for the 2009-10 season. 

Not surprisingly, Frattini's new bike is a fair bit heavier than the one he used three years ago – by a significant 0.6kg (1.3lb) – and one of his competitors at the recent Boulder Cup in Colorado even playfully mocked it as "a tank" at 8.2kg (18.08lb).

Fuji build their top-end 'crosser with a proprietary 'A6 quaternary alloy', which they claim is 35 percent stronger than typical aluminium alloys and allows for thinner walls in the weld zones as a result. 

Tube shaping is fairly aggressive: the down tube is slightly ovalised at both ends, the top tube is highly flattened for shouldering comfort, the seat tube flares from round to rectangular below the front derailleur clamp, and the chainstays and seatstays both take an 'S'-shaped path from end to end. 

Up front, an integrated head tube surrounds a straight 1 1/8in alloy steerer mated to an alloy crown and carbon blades. Claimed frame weight is a competitive 1,530g (3.37lb) but the mixed material fork is a comparatively hefty 750g.

However, weight isn't everything. Frattini crossed the Boulder Cup line ahead of said competitor (who was on a much lighter machine) and regularly lands in the top 10 at major US races. In fact, the former 'Baby' Giro d'Italia winner is quick to point out that in some areas, the additional mass has lent performance gains, not losses.

"[The Fuji Cross RC] is one of the very few bikes that I've never had a problem with the fork chattering without having to toe-in the brake pads," Frattini said. "I rode full carbon bikes or aluminium with carbon rear stays in the past and the Fuji Cross RC has only a carbon fork. But despite this, it still has good stiffness without being a heavy bike."

Frattini's bike is fitted with top-end mavic cosmic carbone ultimate tubular wheels: frattini's bike is fitted with top-end mavic cosmic carbone ultimate tubular wheels

Instead of focusing on weight, Frattini emphasises the importance of good handling characteristics and the ability to maintain traction since the courses can be quite technical and typically incorporate very little climbing. Interestingly, he also adds that while stiffness is generally good, there is such a thing as too much of it when the conditions are loose.

"In cyclo-cross you have a lot of cornering and acceleration so I prefer a bike that has great handling and enough stiffness without being too snappy," he said. "A 'cross bike doesn't need to be overly snappy because as soon as you push the pedals on a turn the bike will react. In the slow turns you can lose the handling of the bike."

Frattini's race machine starts life as a fully stock Cross RC complete bike, including the second-tier Shimano Ultegra component group – essentially the functional equivalent of Dura-Ace but a touch heavier. A collection of personal sponsors cleave off a good chunk of mass from the rest of the stock build's 8.7kg (19.14lb) figure, though, while also upping the performance ante.

The shimano ultegra front derailleur has to be set fairly high in order to clear the rotor q-rings' elliptical profile: the shimano ultegra front derailleur has to be set fairly high in order to clear the rotor q-rings' elliptical profile

Substitutions include a Rotor Ágilis compact crankset with matching Q-Ring 36/46T elliptical chainrings, FSA SL-K carbon bars and alloy stem, a radical looking Selle SMP Composit Carbon Rail saddle, and top-notch rolling stock in the shape of Mavic Cosmic Carbone wheels and Gommitalia's lighter-edition Magnum Cross Performance 32mm-wide tubulars.

Frattini seems particularly fond of the new chainrings, though not for their purported efficiency advantages but rather their ability to maintain grip. "They work great. I felt weird when I started using it but soon after I really felt my spin was smoother and rounder, like I was always pushing," he said. "A more well-rounded, smooth spin without any dead spots improves your traction. In cyclo-cross it's important to have as much traction as possible."

Likewise, tyre pressure is carefully tuned based on course conditions to maximise grip. "I like to run low pressure and almost feel the tyre 'works' on the rim, which can be uncomfortable for a roadie to feel that kind of sensation," Frattini said.

The gommitalia magnum cross tubulars use a familiar tread design: the gommitalia magnum cross tubulars use a familiar tread design

"Usually I start the warm-up with two bars [29psi] and then manually take out some air until I feel comfortable on the corners. The amount of air I take out depends on the terrain: less if it's dry and more if it's muddy. It is really a feeling, not a number, based on the different courses. Basically I ride almost touching the rims and try to flow as much as possible."

Function over flash, form over fashion. While other competitors might lament having to use a heavier machine, Frattini's pragmatic approach seems to be serving him well. In this past weekend's Mercer Cup in West Windsor, New Jersey, Frattini finished fifth on Saturday and seventh – plus the holeshot – on Sunday.  

"You don't really need the nicest or lightest or most expensive bike out there," he said. "For 'cross you should look more for a bike that is robust and strong and has good handling because that will excel your own handling skills and that is really what 'cross is about."

The compact bend makes for an easier reach to the drops: the compact bend makes for an easier reach to the drops

Complete bike specifications 

  • Frame: Fuji Cross RC, 54cm, butted A-6 alloy
  • Fork: Fuji FC-770 bonded carbon cross w/ 1-1/8in alloy steerer
  • Headset: Cane Creek CX integrated
  • Stem: FSA SL-K, 12cm x-6°
  • Handlebars: FSA SL-K, 44cm (c-c)
  • Tape/grips: Cork
  • Front brake: TRP EuroX w/ Inplace Adjust holders and SwissStop Yellow King pads
  • Rear brake: TRP EuroX w/ Inplace Adjust holders and SwissStop Yellow King pads
  • Brake levers: Shimano Ultegra STI Dual Control ST-6700
  • Front derailleur: Shimano Ultegra FD-6700-B
  • Rear derailleur: Shimano Ultegra RD-6700-SS
  • Shift levers: Shimano Ultegra STI Dual Control ST-6700
  • Cassette: Shimano Dura-Ace CS-7800, 12-25T
  • Chain: Shimano Ultegra CN-6700
  • Crankset: Rotor Ágilis compact, 172.5mm, 36/46T Rotor Q-Rings (position #3)
  • Bottom bracket: Rotor SABB Ceramic
  • Pedals: Shimano XTR PD-M970
  • Wheelset: Mavic Cosmic Carbone Ultimate
  • Front tyre: Gommitalia Magnum Cross Performance tubular, 32mm
  • Rear tyre: Gommitalia Magnum Cross Performance tubular, 32mm
  • Saddle: Selle SMP Composit Carbon Rail
  • Seatpost: FSA SL-K SB0

Critical measurements  

  • Rider's height: 5ft 11in
  • Rider's weight: 138lb
  • Saddle height, from BB (c-t): 745mm
  • Saddle setback: 70mm
  • Seat tube length, c-t: 540mm
  • Seat tube length, c-c: 507mm
  • Tip of saddle nose to C of bars (next to stem): 570mm
  • Saddle-to-handlebar drop (vertical): 90mm
  • Head tube length: 115mm
  • Top tube length: 552mm
  • Total bicycle weight: 8.2kg (18.08lb)
James Huang

Technical Editor, US
James started as a roadie in 1990 with his high school team but switched to dirt in 1994 and has enjoyed both ever since. Anything that comes through his hands is bound to be taken apart, and those hands still sometimes smell like fork oil even though he retired from shop life in 2007. He prefers manual over automatic, fizzy over still, and the right way over the easy way.
  • Discipline: Mountain, road, cyclocross
  • Preferred Terrain: Up in the Colorado high-country where the singletrack is still single, the dirt is still brown, and the aspens are in full bloom. Also, those perfect stretches of pavement where the road snakes across the mountainside like an artist's paintbrush.
  • Beer of Choice: Mexican Coke
  • Location: Boulder, Colorado, USA

Related Articles

Back to top