Going solely by the numbers, Zipp’s 101s doesn’t seem all that impressive. The 30mm, fully toroidal, 6000 series alloy rims make for a somewhat heavy overall package at 1,592g (with rim strips; skewers add another 76g).
In fact, the 101s are heavier than both Mavic’s Ksyrium Elites, which cost roughly half as much, and Shimano’s carbon Dura-Aces, which are favorite of ours for their tubeless compatibility and traditional loose ball hubs. The fact that much of the Zipp wheels’ weight is in the rim gives them a slightly sluggish acceleration that’s noticeable on the bike.
What the 101s lack in lightness, however, they make up for in ride quality. The rims are wide and reasonably tall when compared to other alloy models. Both features lend a surefooted feel that will be appreciated by most every rider. The wide profile also allows for a reasonable amount of give, when compared to deep carbon rims.
The 101 rim features a fully toroidal shape:Matt Pacocha
The 101 rims feature a full toroidal shape
The rims’ 16mm inner width – roughly 2mm wider than standard – takes your favorite road clinchers and changes their shape for the better in almost all instances. Cornering characteristics, straight line drive and bump absorption are all improved because of the rim’s influence on tire shape. In fact, performance improves exponentially as the size of the tire increases from 23mm to 25mm and larger.
We tested the 101s with 23mm and 25mm Continental rubber as well as a pair of 32mm Challenge Fango cyclo-cross tires. While every combo we tried performed well, the 25mm road tires and Fango ’cross tires seemed to reap the greatest rewards. The road tires ate up tricky mountain descents with great confidence and the rims supported the ’cross tires in a way that reduced folding at lower pressures, which in turn encouraged the running of even lower pressures.
The bummer here is that you’re still dealing with clinchers, which means you need to be wary of pinch flats and dented rims; the latter is a serious issue considering the wheelset’s cost. While the 101s work really well with ’cross tires, bear in mind that they’re still clinchers and there are better tubular or tubeless options out there.
It’s not just on the descents where the 101s excel; they’re also good on dirt roads and rough surfaces, where the rim profile enhances tire grip and bump absorption. While acceleration is slightly slugglish, wheel stiffness is good, which helps minimize the effect of the added mass. It also helps the wheels track on descents, as well as offering a good platform for sprinting.
The extra inertia of the heavy rims means that, once up to speed, they roll fast and feel as though they’re helping to maintain your pace – an attribute you often feel with heavier deep section wheels but rarely with reasonably light alloy wheels. Zipp are always keen to talk about the aerodynamics of their wheels, and this is an area where that may come into play. However, assessing the aero qualities of wheels like the 101s while riding is about as easy as landing a 747 on a short runway – in a snowstorm.
Hubs and spokes
The fully toroidal alloy rims are laced to Zipp’s top-of-the-line 88/188-hubset with 18 front and 20 rear Sapim CX-Ray spokes. The front wheel is laced radially, while the rear features radial driveside lacing and one-cross non-driveside lacing. The hubs are machined from a proprietary Z310.9 alloy in Speedway, Indiana – where the 101s are built alongside Zipp’s carbon options. They feature steel cartridge bearings, 17mm axles, external preload adjustment and aero end caps.
The 188 rear hub has an aero non-drive bearing preload cap and complementary red accents:Matt Pacocha
The 188 rear hub has an aero non-drive bearing preload cap and complementary red accents
Zipp make the 188 rear freehub internals using wire EDM, a notably high-precision – and expensive – process that yields a claimed 50 percent jump in hardness and a 20-fold improvement in dimensional tolerances, since there’s no final heat hardening required that could warp the piece. Before the introduction of this hubset we’d have said that hubs were the Achilles heel of Zipp wheels, but since riding the 88/188 combo we’ve yet to be let down by their performance.
Overall, the 101s do a darn good job of finishing off a high-end road bike for everyday training and riding with virtually no compromise. They’re more exciting than most of the competition, and if you disregard the US$1,300 price tag, they’re every bit as practical. If we were judging these wheels on performance alone, we’d give them 4/5 – and if they were tubeless that would rise to 4.5/5. However, considering their price, we feel a 3.5/5 is the most appropriate score.
Aero profiled 30mm alloy clincher wheelset
Accessories Supplied With Wheel
Profiled Straight Pull
Z3 10.9 Alloy Shell / Alcoa 7XXX Axle
The world's most aerodynamically advanced aluminum wheelset, the all-new Zipp 101. It's the most affordable way to take advantage of Zipp's cutting-edge aero technologies and premium build quality.