Verve Infocrank power meter review

New outfit’s crank-based system

Our rating 
4.0 out of 5 star rating 4.0
GBP £1,149.00 RRP | AUD $1,949.00 | USD $1,399.00
Verve's Infocrank has thrown down the gauntlet impressively to the power meter establishment

Our review

Newcomer delivers excellent performance and runs the biggest names very close
Buy if, You're willing to look beyond the established names and go with an excellent newcomer
Pros: Accuracy, consistency
Cons: TA rings, chunky looks
Skip to view product specifications

Advertisement MPU reviews

Verve is the newest name to the power meter market and came in swinging, claiming the Infocrank is the most accurate meter available, with twice the fidelity of an SRM. It’s a true left/right system, with four strain gauges in each crank arm.

A key difference is that these cranks were designed from the outset to be a power meter, so the strain gauges are placed in the precise load path to avoid data corruption by twisting forces. Verve claims its data is accurate to within 1% across the full measurement range of 0-3000w, and says there’s zero temperature drift or need to perform a pre-ride manual calibration – and our tests back that up. This is a true get-on-and-go meter.

The Infocrank comes with specific bottom bracket cups and has a 30mm axle so should fit most frames. Infocrank uses a magnet and reed switch for cadence but has a clever magnet bracket that clamps over the bottom bracket. Infocrank says a magnet prevents data corruption from poor road surfaces.

The 110BCD crankset comes with Praxis rings in 50/34 or 52/36, or TA Syrius rings in 53/39. Our test set came with the latter and we noticed a small decrease in shifting performance. The five-bolt pattern does mean you can use other chainrings.

There are two LR44 batteries on each side under a bolt-on cover. They’re readily available, quick to swap and are claimed to last 500 hours. Fans of marginal gains may sniff at the above-average 195g weight penalty over a Dura-Ace 9000 crankset, and even the aero implications of such broad and square cranks, though only high-level hill climbers and time triallists should give it a second thought.

When it comes to the crucial stuff, delivering clean and accurate data, the Infocrank excels. Throughout testing it was faultless. Verve suggested that it might read lower than other meters but we found it tracked alongside. We can’t say if it’s accurate to 0.5% or 1%, and for all Verve’s claims and unique design it didn’t do anything better than the SRM or Quarq, but they don’t leave much headroom anyway. The Infocrank is an excellent power meter.

Advertisement MPU reviews

If you’d like to know more about how the Infocrank stacks up against the competition, check out our nine-way power meter test video.

If you’d like to know more about how the infocrank stacks up against the competition, check out our nine-way power meter test video.

Product Specifications


Name Name, 0, 10, Name, Infocrank
Brand Brand, 0, 20, Brand, Verve

SetUp SetUp, 2, 0, SetUp, Crank
Weight Weight, 2, 0, Weight, 831g (689g cranks, 142g rings)
Left/Right Measurement Left/Right Measurement, 2, 0, Left/Right Measurement, Yes
DIY Battery Swap DIY Battery Swap, 2, 0, DIY Battery Swap, Yes
Battery Battery, 2, 0, Battery, LR44
Battery Life Battery Life, 2, 0, Battery Life, claimed 500hrs