Trail Tech: Garmin mounts for mountain bikers

A look at trail-worthy computer mounts

Garmin cycling computers are not just tools for road riders, nor is their use limited to cross-country racers. Trail riders and enduro racers are increasingly using them to log miles and track routes. While cycling computers can be just as useful on the dirt as they are on the pavement, the demands placed on them, as well as the way riders interact with them, are quite different.

Out-front mounts can be distracting on the mountain bike, not to mention the fact they’re more exposed in the event you take a tumble. Here’s a look at several Garmin Edge 200/500 and 510/800/810 computer mounts that are suitable for mountain biking.

Garmin quick release mount

The stock mount that comes with many Garmin cycling computers allows the unit to be mounted in a variety of locations, including the handlebar, on top of the stem or even on the top tube. Some enduro racers prefer the top tube location, as it keeps the computer safe in the event the bike goes tumbling away from them.

The downside of this approach is that it’s very hard to view while riding. Other negatives include the fact that the rubber O-rings used to secure the mount are prone to slipping and can become brittle in cold weather.

  • Best for: Riders who want to get creative with mounting location such as on the top tube

Pro Mount Billet - Enduro Mount

The downside to the enduro mount is that it sits high on the cockpit: the downside to the enduro mount is that it sits high on the cockpit
The downside to the enduro mount is that it sits high on the cockpit: the downside to the enduro mount is that it sits high on the cockpit

The Australian component company Pro Mount Billet has developed a Garmin mount that takes the place of your top cap. The Enduro Mount consists of two pieces: the first acts as the compression cap for the headset, while the second piece screws into the first to hold the computer in place.

The two-piece design can be installed in a few minutes and you hardly notice it when it's not being used. Plus, it works well with short (40-50mm) stems.

On the downside, the Enduro Mount does position the computer higher than other Garmin mounts — on more than one occasion I chest-bumped my computer during technical climbs.

  • Best for: Enduro racers and trail riders using short stems with no spacers on top

Tate Labs – Bar Fly 3.0

The mount works well with flat or riser bars:
The mount works well with flat or riser bars:

The Bar Fly 3.0 is a good all-around mount for most mountain bikers. At 17g it’s very light and the raised arm allows it to work well with flat or riser handlebars.

Part of the appeal of the Barfly 3.0 is that is easy to install and remove and works just as well on road bikes as it does on mountain bikes.

  • Best for: Mountain bikers who want a mount they can use on any bike they own

Your pocket or hydration pack

This option is very appealing because the odds are quite good that you already own a hydration pack — and I hope you wear pants when you ride.

While it costs nothing, and offers a lever of protection that exceeds all the other options, you may experience interference issues. The lack of easy access to your device may mean you’re less likely to use it, too.

  • Best for: Riders more interested in tracking total distance than specific segments

A GPS watch

Our own Robin Weaver (and former mountain bike racer) prefers to ride with a Garmin Forerunner 210 watch. Designed for runners, the Forerunner 210 records your ride with elevation, route and time information similar to a bike Garmin, but the interface is fairly run-specific.

This approach definitely takes the Garmin off the bike, though!

  • Best for: Riders who like the convenience of a watch and don't need many on-the-bike metrics

What do you think: Do you mountain bike with a Garmin? If so, what’s your preferred mounting method?

Josh has been riding and racing mountain bikes since 1998. Being stubborn, endurance racing was a natural fit. Josh bankrolled his two-wheeled addiction by wrenching at various bike shops across the US for 10 years and even tried his hand at frame building. These days Josh spends most of his time riding the trails around his home in Fort Collins, Colorado.
  • Discipline: Mountain, cyclocross, road
  • Preferred Terrain: Anywhere with rock- and root-infested technical singletrack. He also enjoys unnecessarily long gravel races.
  • Current Bikes: Trek Remedy 29 9.9, Yeti ASRc, Specialized CruX, Spot singlespeed, Trek District 9
  • Dream Bike: Evil The Following, a custom Moots 27.5+ for bikepacking adventures
  • Beer of Choice: PBR
  • Location: Fort Collins, CO, USA

Related Articles

Back to top